Budii1031 Firmware.
Build Time 2013.12.06-12:36:03

Fixes:

- Add patch to enhance NAND flash boot up. 
- Add a patch to optimize heavy traffic control to avoid Budii hang on during P2P download, 
- Increase NAT session number to 4096.
- Fix DECT call log over float issue, increases call log number up to 300 and design a mechanism to re-allocate call log to avoid VoIP function crash.
- Add disable option for WIFI WPS

Installation Instruction:

1. Open up a web browser.
2. type in http://10.1.1.1 into the address field of your web browser.
3. Enter in your modems password (Default is admin).
4. Navigated to "Handy Tools".
5. Select Continue under the Firmware upgrade section.
6. Browse to the location that you have saved firmware file name "Budii_nand_fs_image_128_1031.w".
7. Select the firmware.
8. Select Upgrade firmware.

Note: It will take around 3-5 minutes for the firmware upgrade to complete and for Budii to come back on line.  

A factory restore should not be required after doing the upgrade, however if you find that you are still having problems after the upgrade; we recommend that you should proceed with a factory restore and enter in all your custom settings again.