CRF775
* Update WAN Autosensing using DNS check to address no Internet Check page
* Update NTP server default addresses
* Set MTU on Ethernet WAN and ADSL and VDSL to 1500
* Command injection Disabled
* TR143 download diagnostics added
* Upgrade dnsmasq to 2.7
* Display VLAN ID and dsl status on Broadband card
* Split Gateway IP and netmask onto two lines on LAN card
* New Internode Logo
* Display MTU in advanced settings on Broadband modal
* New warning on Time of Day Modal
* The DUT will block/allow all the time if none of the days are selected
* Display Firmware version on Login Window
* Add PPP Credential Setting in DHCP router window (for when auto wan sensing has not detected ppp yet
* Wizard Page 3 (wifi) Wireless 2.4GHz (WiFi): - Disables/Enables 2.4GHz Radio instead of just disabling/enabling SSID (to be same as TG789vac v2)


CRF557
* Support bridge mode in GUI under LAN section
* Calling Synergy Energy causes gateway to reboot
* Invite with inactive attribute not unmuting with a SIP without a SDP
* Factory reset required for payload 101 and 180 chages to take effect after upgrading from an eairlier firmware
* Modem GUI shows 503 error code

CRF509	
* NAT fix - Firewall modification
* Add static WAN IP feature 

CRF507	
* Add VLAN support
* Misc changes to GUI pages
* RTP Payload=101
* Remote Assistance persistant over reboot

CRF488
* List codec name on telephone-global page
* call waiting provisional response=180

CRF472	
* Add video6 to wan firewall zone
* Change ipqos rule definitions
* Disable G722
* Add local AU dial tone
* Wansensing to include ppp over vlan and ppp with no vlan
* Extra GUI pages for IPv6 and time of day and qos and iproutes
* Changes to Broadband/Internet/wifi LEDs
* Add Wake on LAN feature
* Extend firewall logread buffer
* ISP (iiNet/Internode) selection in GUI
* Add QoS in GUI
* Misc changes to GUI pages