2007-08-21  Matthew Fredrickson <creslin@digium.com>

	* Zaptel 1.4.5.1 released.
	
2007-08-21 18:42 +0000 [r2922-2924]  Matthew Fredrickson <creslin@digium.com>

	* wctdm24xxp/GpakCust.h, wctdm24xxp/wctdm24xxp.h,
	  wctdm24xxp/base.c, /, wctdm24xxp/GpakCust.c: Merged revisions
	  2923 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2923
	  | mattf | 2007-08-21 13:40:23 -0500 (Tue, 21 Aug 2007) | 1 line
	  Allow wctdm24xxp to compile on a 2.4 based kernel ........

	* Makefile: Add some 2.4 Makefile trickery for wctdm24xxp

2007-08-21 16:49 +0000 [r2920]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xbus-core.c, /: Fix building on kernel 2.6.23rc1, from Axel
	  Thimm (xpp r4523). Merged revisions 2919 via svnmerge from
	  http://svn.digium.com/svn/zaptel/branches/1.2

2007-08-21 15:02 +0000 [r2917]  Russell Bryant <russell@digium.com>

	* firmware/Makefile: change ftp to downloads

2007-08-21 08:21 +0000 [r2911-2915]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* fxotune.c, /: * Add an explicit mode to the callto open (the
	  default one that is used anyway). * Clarify error message. closes
	  #10505 on Zaptel 1.4. Merged revisions 2914 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

	* /, zaptel.init: * Set maximal zaptel udev timeout to 20 seconds.
	  * Allow overriding it from cwrcconfconfig file (and explain how).
	  (From trunk r2909 - got accidentally commited there first).
	  Merged revisions 2910 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

2007-08-19 12:12 +0000 [r2905-2907]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, xpp/README.Astribank: Fix README.Astribank with asciidoc
	  8.2.2: make "underlining" more strict. (xpp r4519) Merged
	  revisions 2906 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

	* Makefile, /: * Fix Makefile typo in 'install-progrms:' (Thanks,
	  Mark Purcell). * Rename the generated xpp/README.html to
	  xpp/README.Astribank.html to provide a unique basename among docs
	  (helps debian packaging).

2007-08-17  Matthew Fredrickson <creslin@digium.com>

	* Zaptel 1.4.5 released.
	
2007-08-17 18:13 +0000 [r2866-2881]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, build_tools/install_prereq: install_prereq: Don't install
	  packages twice. Merged revisions 2880 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

	* /: An 1.2-specific fix.

	* Makefile, README, /: * programs and install-programs are now for
	  all of userspace. Added the target 'utils' for what 'programs'
	  used to be. * tonezone.h is installed with install-libs, not
	  install-include . * Document this. * Document some other
	  variations on 'make' and 'make install'. * Improve documentation
	  of /proc/zaptel . * Ignoring some more utilities.

	* /: No need to merge those changes - the implementation in 1.4 is
	  different.

	* Makefile, makeopts.in: Get LDFLAGS and CFLAGS from autoconf. Make
	  sure that they get everywhere.

	* Makefile: Build menuselect with the HOSTCC.

	* xpp/xpp_zap.c, xpp/.version,
	  xpp/utils/zconf/Zaptel/Config/Defaults.pm, xpp/card_fxo.c,
	  xpp/xbus-sysfs.c, xpp/xpp_zap.h, xpp/card_global.c,
	  xpp/card_fxs.c, xpp/README.Astribank, xpp/xproto.c, xpp/xpd.h,
	  xpp/card_bri.c, xpp/zap_debug.h, xpp/ChangeLog, xpp/xbus-core.c,
	  /, zaptel.sysconfig, xpp/utils/genzaptelconf, xpp/xpp_usb.c: xpp
	  rev. 4515: * BRI improvement: an 'nt_keepalive' parameter to
	  xpd_bri forces a BRI_NT to retry a connection indefinitely (this
	  is our default). When false it revert to the behaviour in
	  changeset:4415 ("Bezeq like") * Improvement in DBG macros. The
	  print_dbg parameter is now set of flags to debug. They are
	  defined in zap_debug.h * Don't use Astribanks connected to USB1
	  interfaces Unless the user set the option usb1=1 for xpp_usb
	  (r4504). * And some more documentation... * Include some of our
	  variables in the default zaptel sample file. Merged revisions
	  2860 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

2007-08-16 20:48 +0000 [r2858-2865]  Matthew Fredrickson <creslin@digium.com>

	* wcte12xp.c, /: Merged revisions 2864 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2864
	  | mattf | 2007-08-16 15:47:46 -0500 (Thu, 16 Aug 2007) | 1 line
	  Make sure we enable MRM ........

	* /, wctdm24xxp/GpakApi.c: Merged revisions 2861 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2861
	  | mattf | 2007-08-16 15:10:03 -0500 (Thu, 16 Aug 2007) | 1 line
	  Remove some unused variables from compilation ........

	* wcte12xp.c, wctdm24xxp/base.c, /: Merged revisions 2857 via
	  svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
	  ........ r2857 | mattf | 2007-08-16 15:02:58 -0500 (Thu, 16 Aug
	  2007) | 1 line Fix for when voicebus based cards stop taking
	  interrupts on some systems ........

2007-08-16 18:39 +0000 [r2855]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, /, xpp: * Add a rule for generating xpp/README.html
	  (not used by default). * Ignore it, and clean it and README.html
	  . Merged revisions 2850 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

2007-08-16 17:05 +0000 [r2853]  Matthew Fredrickson <creslin@digium.com>

	* wctdm24xxp/base.c, /: Merged revisions 2852 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2852
	  | mattf | 2007-08-16 12:01:18 -0500 (Thu, 16 Aug 2007) | 1 line
	  Make sure the gain adjustment is only done if the VPM100M is
	  present ........

2007-08-16 13:32 +0000 [r2849]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Break install target, as in 1.2: * Provide separate
	  programs and libs targets , and provide separate
	  install-programs, install-libs , install-includes and
	  install-modules. * DESTDIR should work. INSTALL_PREFIX was
	  removed, as it was ambigious. Use the vaiable 'prefix' to
	  override /usr . * Print a message at the end of the install
	  target. * Convert shell logic in targets to make logic. * Still
	  not sure install-libs and install-includes are really needed. *
	  Use includedir, mandir and libdir (but not sbindir) from
	  configure. * Install Man pages and utils according to those
	  selected by the user.

2007-08-15 22:12 +0000 [r2842-2847]  Matthew Fredrickson <creslin@digium.com>

	* ztdynamic.c: Fix for 8277. Inproper alarm handling on dynamic
	  spans

	* Makefile: Make sure that the URL is REALLY up to date

	* Makefile: Make sure we use the new ftp.digium.com

2007-08-15 14:26 +0000 [r2833-2839]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile, README, /, Makefile.kernel26, zconfig.h: * Allow
	  setting the echo canceller from the Makefile or the environment
	  (needed for overriding the default EC in Debian m-a builds) *
	  Allow specifiying extra modules in the make command line:
	  MODULES_EXTRA and SUBDIRS_EXTRA Merged revisions 2838 via
	  svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2

	* /, Makefile.kernel26: Fix building on older CentOS 4 and Trixbox.
	  Merged revisions 2836 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

	* xpp/.version, xpp/ChangeLog, /, xpp/README.Astribank,
	  xpp/card_fxs.c, xpp/xproto.c: Merging a few small changes Xorcom:
	  * Marked with no. 4416, to note that major changes after 4415
	  were note merged yet. * Demote the messages about PCM in non-PCM
	  from notice to debug (r4501). * Fix sample BRI zapata.conf: NT
	  instead of TE (r4498). * Disable FXS hardware DTMF detection by
	  default (r4492). Merged revisions 2832 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

2007-08-10 21:58 +0000 [r2830]  Matthew Fredrickson <creslin@digium.com>

	* wctdm24xxp/base.c, /: Merged revisions 2829 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2829
	  | mattf | 2007-08-10 16:54:56 -0500 (Fri, 10 Aug 2007) | 1 line
	  Make sure we permit MRM commands ........

2007-08-06 20:31 +0000 [r2821-2824]  Jason Parker <jparker@digium.com>

	* Makefile: Use host compiler to build gendigits Issue 10255,
	  initial patch by mirabilos, modified by me to work with 1.4.

	* zaptel.h: Include some headers from the target system rather than
	  the build system. Issue 10254, patch by mirabilos

2007-08-05 12:31 +0000 [r2819]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, xpp/utils/zconf/Zaptel/Hardware/PCI.pm: Extra Zaptel PCI IDs
	  (from Philipp Kempgen). From Xorcom r4466. Merged revisions 2818
	  via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2

2007-08-01 22:41 +0000 [r2812]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_zap.c, xpp/.version, xpp/firmwares/FPGA_1141.hex,
	  xpp/card_fxo.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h,
	  xpp/xbus-sysfs.c (added), xpp/card_fxs.c, xpp/xproto.c,
	  xpp/utils/Makefile, xpp/Makefile, xpp/firmwares/FPGA_FXS.hex,
	  xpp/card_global.h, xpp/xpd.h, xpp/xproto.h, xpp/zap_debug.h,
	  xpp/card_bri.c, xpp/ChangeLog, xpp/xbus-core.c, /,
	  xpp/utils/xpp_fxloader, xpp/xbus-core.h, xpp/utils/astribank_hook
	  (added), xpp/utils/xpp.rules, xpp/xpp_usb.c: xpp.r4415: * Show
	  Astribank 6+2 as 6/2 channels and not 8/8 channels. - Added as a
	  "subtype" to the device type (r4391). * Fixed a panic in BRI span
	  shutdown method (r4393). * Changes to debug macros. * Add proper
	  sysfs support (r4406) - A bus on whuch all of the Astribanks
	  reside. - Replaces useless sysfs code that existed in the module.
	  - Currently used to set the sync source automatically at device
	  adition / removal. * BRI: We do need the T1 timer in NT. If it
	  gets into G2 state (rr4407). Merged revisions 2811 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2

2007-08-01 20:21 +0000 [r2809]  Jason Parker <jparker@digium.com>

	* /, zaptel-base.c: Merged revisions 2808 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2808
	  | qwell | 2007-08-01 15:21:04 -0500 (Wed, 01 Aug 2007) | 2 lines
	  Per Matt Fredrickson, we don't want to use GFP_KERNEL while
	  holding a spinlock. ........

2007-08-01 00:15 +0000 [r2806-2807]  Jim Dixon <telesistant@hotmail.com>

	* pciradio.c: Merged back in some changes I wasnt aware of

	* pciradio.c: Much newer and improved version of pciradio driver

2007-07-30 17:23 +0000 [r2802]  Jason Parker <jparker@digium.com>

	* /, hpec/hpec_zaptel.h: Merged revisions 2251 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2251
	  | kpfleming | 2007-02-28 14:44:28 -0600 (Wed, 28 Feb 2007) | 2
	  lines allow the HPEC to work even if echotraining has been
	  requested (the HPEC doesn't do echotraining, but it shouldn't
	  fail just because the user asked for it) ........

2007-07-29 00:39 +0000 [r2797]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, wctdm24xxp, xpp/utils: * Ignore generated files on the new
	  wctdm24xxp dir. (from 1.2 r2796) * Ignore two extra man pages on
	  xpp/utils .

2007-07-27 21:56 +0000 [r2790]  Jason Parker <jparker@digium.com>

	* /: Blocked revisions 2789 via svnmerge ........ r2789 | qwell |
	  2007-07-27 16:55:56 -0500 (Fri, 27 Jul 2007) | 3 lines Rearrange
	  and add some Makefile targets to be in line with the original
	  intentions of the addition of targets such as install-programs.
	  ........

2007-07-27 19:36 +0000 [r2782-2787]  Matthew Fredrickson <creslin@digium.com>

	* fxotune.c: Quick fix for the could not fill input buffer problem

	* wctdm24xxp/base.c, /: Merged revisions 2781 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2781
	  | mattf | 2007-07-27 14:02:28 -0500 (Fri, 27 Jul 2007) | 1 line
	  Minor message removal ........

2007-07-24 18:02 +0000 [r2776]  Joshua Colp <jcolp@digium.com>

	* firmware/Makefile, wctdm24xxp/VPMADT032.bin (removed),
	  wctdm24xxp/Makefile, wctdm24xxp/Makefile.kernel26: Add support
	  for building the firmware for the wctdm24xxp driver as an object
	  using the new firmware system.

2007-07-22 17:46 +0000 [r2772]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Revert initd config file installation to the greeddy
	  one of before zaptel 1.2.19/1.4.4 - install on both
	  /etc/default/zaptel and /etc/sysconfig/zaptel . Closes 0010257 .
	  (From branches/1.2 r2771)

2007-07-20 22:57 +0000 [r2762-2769]  Matthew Fredrickson <creslin@digium.com>

	* firmware/Makefile, wctdm24xxp/base.c, firmware/firmware.xml: Make
	  sure we use the new firmware interface

	* wctdm24xxp/base.c, /: Merged revisions 2765 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2765
	  | mattf | 2007-07-20 14:17:25 -0500 (Fri, 20 Jul 2007) | 1 line
	  Add new 2.6.22 api updates ........

	* Makefile, wctdm24xxp/base.c, wctdm24xxp/GpakApi.c,
	  wctdm24xxp/gpakenum.h, wctdm24xxp (added), wctdm24xxp/GpakApi.h,
	  wctdm24xxp/GpakCust.c, wctdm24xxp/Makefile.kernel26,
	  wctdm24xxp/gpakErrs.h, zaptel-base.c, wctdm24xxp/GpakCust.h,
	  wctdm24xxp/GpakHpi.h, wctdm24xxp/wctdm24xxp.h, /,
	  wctdm24xxp/Makefile, wctdm24xxp.c (removed): Merged revisions
	  2761 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2761
	  | mattf | 2007-07-20 11:19:47 -0500 (Fri, 20 Jul 2007) | 1 line
	  New product support, new echo canceler and new boards ........

2007-07-19 09:16 +0000 [r2759]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/Makefile: * Generate list of Zaptel Modules directories
	  automatically. * Evaluate PERLLIBDIR only once. Closes: #10223
	  (Xorcom changeset:4379, from 1.2 r2758)

2007-07-19 02:07 +0000 [r2753-2757]  Kevin P. Fleming <kpfleming@digium.com>

	* ztdummy.c, pciradio.c, wct4xxp/base.c, wcte11xp.c, wcte12xp.c,
	  wct1xxp.c, wctc4xxp/base.c, wctdm.c, /, torisa.c, wctdm24xxp.c,
	  zaptel.h, tor2.c, wcfxo.c: Merged revisions 2756 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r2756 | kpfleming | 2007-07-18 21:05:03 -0500 (Wed, 18 Jul 2007)
	  | 2 lines update to 2.6.22 request_irq() flags ........

	* wcte12xp.c, wctc4xxp/base.c, /, wctdm24xxp.c: Merged revisions
	  2754 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2754
	  | kpfleming | 2007-07-18 20:21:25 -0500 (Wed, 18 Jul 2007) | 2
	  lines convert a few drivers over to current PCI module
	  registration function ........

	* /, zaptel-base.c: Merged revisions 2752 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2752
	  | kpfleming | 2007-07-18 20:02:53 -0500 (Wed, 18 Jul 2007) | 2
	  lines don't try to timeslot-interchange channels that are being
	  bridged (DACS) if either channel has a txgain or rxgain
	  specified, since that gain won't be applied any longer if the
	  DACS is put into effect ........

2007-07-18 16:27 +0000 [r2751]  Joshua Colp <jcolp@digium.com>

	* /: Blocked revisions 2750 via svnmerge ........ r2750 | file |
	  2007-07-18 13:27:04 -0300 (Wed, 18 Jul 2007) | 2 lines A
	  distribution may have multiple directories for firmware and
	  without knowing the proper one we have to copy the firmware into
	  each. We can't just copy it into the first one found. ........

2007-07-16  Russell Bryant <russell@digium.com>

	* Zaptel 1.4.4 released.
	
2007-07-16 13:14 +0000 [r2740]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* zaptel.init: Simplify hpec_start and remove duplicates.

2007-07-13 08:22 +0000 [r2733-2736]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_zap.c, xpp/utils/zconf/Zaptel/Config/Defaults.pm,
	  xpp/firmwares/FPGA_1151.hex, xpp/README.metering (added),
	  xpp/xpp_zap.h, xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex,
	  xpp/firmwares/USB_1130.hex, xpp/xpd.h,
	  xpp/firmwares/USB_1150.hex, xpp/xproto.h,
	  xpp/utils/zconf/Zaptel/Config (added),
	  xpp/utils/zconf/Zaptel/Chans.pm, xpp/utils/xpp_blink,
	  xpp/card_bri.c, xpp/ChangeLog, xpp/xbus-core.c,
	  xpp/utils/fpga_load.c, xpp/xbus-core.h, xpp/utils/lszaptel,
	  xpp/xdefs.h, xpp/utils/xpp.rules, xpp/utils/zapconf,
	  xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/utils/xpp_sync,
	  xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/card_fxo.c,
	  xpp/card_global.c, xpp/README.Astribank, xpp/card_fxs.c,
	  xpp/utils/zaptel_hardware, xpp/Makefile, xpp/utils/Makefile,
	  xpp/card_global.h, xpp/firmwares/USB_1140.hex,
	  xpp/init_card_3_26, xpp/utils/zconf/Zaptel/Hardware.pm,
	  xpp/utils/zt_registration, xpp/utils/zconf/Zaptel/Span.pm,
	  xpp/utils/genzaptelconf, xpp/xpp_usb.c: Merge xpp r4372: * Update
	  to zaptel-1.2.18 and zaptel-1.4.3 (r4308 onward) * Fix a critical
	  race with zaptel synchronization (r4362) * Added a /proc/xpp/cmds
	  for statistics about command timing (r4360) * Fix a digit mapping
	  bug with hardware dtmf detection (r4357) * In xpp/utils/Makefile
	  add perl syntax checks to our scripts (r4337) * Better USB data
	  error checking (r4336) * udev rules (xpp.rules) avoid false calls
	  from wrong nodes (r4331) * Improve hardware detection and
	  reporting in lszaptel, zaptel_hardware. zapconf is basically
	  functional. * Leds are blinked synchronously on all Astribanks
	  now (r4262) * Fix a BRI bug if OPTIMIZE_CHANMUTE was compiled
	  into zaptel (r4258) (This feature was not yet accepted into
	  official zaptel) * Removed compile warning about HZ != 1000
	  (r4218) * Firmware updates. * fpga_load now supports USB pathes
	  without zeros (r4211) * XPD numbers have changed to
	  '<Unit><Subunit>' (r4196) * Proper support for ZT_VMWI ioctl, if
	  used in zaptel (r4092) * Fix FXO power denial detection (r4054) *
	  FXO could accidentally go off-hook with some compilers (r4048)
	  (From branches/1.2 r2732, r2735)

	* Makefile: * config target: Replace shell scriptary with makefile
	  logic. * config target: Add a helpful text for the Zaptel
	  installer. (From branches/1.2 r2729)

	* README, build_tools/install_prereq (added): Add a script to
	  install build requirements. This was after the instructions on
	  which kernel to install on CentOS became a manual script with
	  if-s and case-s. Should work on Debian and CentOS. (From
	  branches/1.2 r2728, r2730)

2007-07-11 19:04 +0000 [r2726]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* build_tools/genmodconf: * Use shell, rather than
	  shell-in-makefile syntax. * Supress ugly text when
	  /lib/modules/`uname -r` doesn't exist (but we build for a
	  different kernel) (From branches/1.2 r2724)

2007-07-11 18:14 +0000 [r2718-2722]  Jason Parker <jparker@digium.com>

	* README, /: Merged revisions 2721 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2721
	  | qwell | 2007-07-11 13:14:11 -0500 (Wed, 11 Jul 2007) | 4 lines
	  tzafrir pointed out that this was put in the wrong place. Move it
	  so that asciidoc can properly parse it. ........

	* README, /: Merged revisions 2717 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2717
	  | qwell | 2007-07-11 12:24:21 -0500 (Wed, 11 Jul 2007) | 7 lines
	  On some systems, sudo does not automatically add the PATH for
	  root, so things like /sbin may not be in there, which means
	  chkconfig may not be found. Add a note stating this. Issue 10181.
	  ........

2007-07-11 13:08 +0000 [r2711-2714]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* README: Fix the zaptel-perl install insturctions.

	* README.Linux26 (removed): Remove obsolete and inaccurate
	  README.Linux26 .

	* README, /, zaptel.init, xpp/utils/Makefile: * Enable zaptel-perl
	  and use perl utilities for Astribank init (from 1.2 r2710) *
	  Update README accordingly. * Continue documenting Zaptel, while
	  we're updating the README. * Ignore the generated README.html.

2007-07-08 19:22 +0000 [r2706-2707]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* README: Moving specific commands to a distro-specific part.

	* Makefile, README: * README fixes. * Add makefile target to
	  generate README.html from README with asciidoc. Note: At least
	  for now the ability to generate a nice extra HTML copy of the
	  text README is an extra feature. But the README file is meant to
	  be primarily read as a text file and will still be readable as
	  such till further notice.

2007-07-06 23:24 +0000 [r2703]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* README: Two more sections to the README. Though I'm not quite
	  happy with their style.

2007-07-05 18:10 +0000 [r2697]  Jason Parker <jparker@digium.com>

	* /, zaptel-base.c: Merged revisions 2696 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2696
	  | qwell | 2007-07-05 13:08:53 -0500 (Thu, 05 Jul 2007) | 5 lines
	  Do not report channels in ZT_STATE_KEWL or ZT_STATE_AFTERKEWL
	  (ie; battery drop) states as available. This becomes more likely
	  if ZT_KEWLTIME or ZT_AFTERKEWLTIME are set to higher values.
	  Issue 7612, patch by rbraun. ........

2007-07-04 19:06 +0000 [r2688-2690]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* zaptel.init: Bourne shell scripts should not use >& . dash
	  doesn't support it. And all of them simply supressed errors, so
	  they were replaced with 2> /dev/null . (from branches/1.2 r2689)

	* zaptel.init: Set default value for XPP_SYNC.

2007-07-03 18:58 +0000 [r2684]  Jason Parker <jparker@digium.com>

	* wctdm.c, /: Merged revisions 2683 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2683
	  | qwell | 2007-07-03 13:57:42 -0500 (Tue, 03 Jul 2007) | 4 lines
	  Fix a potential issue with the reversepolarity module option in
	  wctdm. Issue 7191, patch by Thomas Andrews. ........

2007-07-03 16:46 +0000 [r2681]  Matthew Fredrickson <creslin@digium.com>

	* wct4xxp/base.c, /: Merged revisions 2680 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2680
	  | mattf | 2007-07-03 11:39:34 -0500 (Tue, 03 Jul 2007) | 1 line
	  Fix for span shutdown issue ........

2007-07-02 15:58 +0000 [r2676]  Joshua Colp <jcolp@digium.com>

	* /, ztd-eth.c: Merged revisions 2675 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2675
	  | file | 2007-07-02 12:56:18 -0300 (Mon, 02 Jul 2007) | 2 lines
	  Add support for the 2.6.22 kernel. (issue #10095 reported by
	  Matti) ........

2007-07-02 15:07 +0000 [r2674]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* zaptel.init: * Fix unloading of xpp modules. * Add optional
	  support for using the zaptel perl functions. (From branches/1.2
	  changesset:2670 and changeset:2673)

2007-07-02 13:46 +0000 [r2671]  Joshua Colp <jcolp@digium.com>

	* firmware/Makefile, wctc4xxp/tc400m-firmware.bin (removed),
	  wctc4xxp/base.c, wctc4xxp/Makefile.kernel26: Nobody ever updated
	  the wctc4xxp stuff to use the in-tree firmware management
	  stuff... 'tsk 'tsk. (issue #10093 reported by snuffy)

2007-06-26 19:37 +0000 [r2669]  Kevin P. Fleming <kpfleming@digium.com>

	* /: block fix that is not needed here (already present)

2007-06-23 15:55 +0000 [r2664]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* README: * Correct names for Digium cards. * Further removed
	  obsolete sections. * Section about the perl stuff added.

2007-06-21 13:37 +0000 [r2657-2662]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* README: A README that will actually help users a bit.

	* zaptel.init: * Remove ztcfg -s from shutdown. * Someone with a
	  dynamic span, please test the suggested replacement (remmed-out).
	  * Reduced nesting in wait_for_xpp .

	* zaptel.init: Reduce nesting in hpec startup by moving it to a
	  function.

	* zaptel.init: Fix a syntax error in hpec startup.

	* xpp/utils: Ignore some generated man pages.

2007-06-12 14:50 +0000 [r2643-2645]  John Sloan <jsloan@digium.com>

	* wctc4xxp/base.c, /: Merged revisions 2644 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2644
	  | jsloan | 2007-06-12 09:07:18 -0500 (Tue, 12 Jun 2007) | 1 line
	  Corrected test code ........

	* wctc4xxp/base.c, /: Merged revisions 2642 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2642
	  | jsloan | 2007-06-12 08:34:42 -0500 (Tue, 12 Jun 2007) | 1 line
	  Added new PCI device ID ........

2007-06-11 22:18 +0000 [r2639]  Matthew Fredrickson <creslin@digium.com>

	* wct4xxp/base.c, /: Merged revisions 2638 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2638
	  | mattf | 2007-06-11 17:17:14 -0500 (Mon, 11 Jun 2007) | 1 line
	  Add a couple of PCI ids ........

2007-06-11 22:12 +0000 [r2635]  Jason Parker <jparker@digium.com>

	* genconst.c (removed): Remove a file from the tree that hasn't
	  been used in a very long time. The last time this file changed
	  was in revision 79. It is also not referenced anywhere in the
	  tree, and doesn't even compile... Issue 9923, reported by
	  tzafrir.

2007-06-11 22:12 +0000 [r2634]  Matthew Fredrickson <creslin@digium.com>

	* wct4xxp/base.c, /: Merged revisions 2633 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2633
	  | mattf | 2007-06-11 17:10:59 -0500 (Mon, 11 Jun 2007) | 1 line
	  Make the version check optional ........

2007-06-11 15:55 +0000 [r2622]  John Sloan <jsloan@digium.com>

	* wctc4xxp/base.c, /: Merged revisions 2621 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2621
	  | jsloan | 2007-06-11 10:47:37 -0500 (Mon, 11 Jun 2007) | 1 line
	  Fixed SMP bugs on quad processor machines. Reduced memory usage
	  ........

2007-06-09 23:55 +0000 [r2611-2612]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: ó is non-printable on
	  non-UTF-8 locales. Replaced with \['o] to make lintian happy.

	* doc/fxstest.8 (added), doc/fxotune.8: * fxotune man page is
	  up-to-date for 1.4. * fxtest man page.

2007-06-08  Russell Bryant <russell@digium.com>

	* Zaptel 1.4.3 released.
	
2007-06-08 15:58 +0000 [r2601]  Russell Bryant <russell@digium.com>

	* wct4xxp/base.c, /: Merged revisions 2599 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2599
	  | russell | 2007-06-08 10:57:18 -0500 (Fri, 08 Jun 2007) | 1 line
	  Make sure the name is right ........

2007-06-08 15:37 +0000 [r2591-2597]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Make the checkstack target basically work for kernel
	  2.6.

	* xpp/card_fxo.c, xpp/utils/xpp_fxloader: Some XPP bugfixes: * Fix
	  FXO power denial detection (changeset:4054) * Incorrect data type
	  could cause FXO module to go off-hook (changeset:4048) *
	  xpp_fxloader: fix the error message when you want to disable *
	  automatic firmware loading... (changeset:4060) Merged from
	  branches/1.2 r2589

2007-06-07 17:02 +0000 [r2584]  Russell Bryant <russell@digium.com>

	* /: Blocked revisions 2583 via svnmerge ........ r2583 | russell |
	  2007-06-07 12:01:04 -0500 (Thu, 07 Jun 2007) | 4 lines The -quit
	  option to find is not supported on the version of find installed
	  on Centos 4. Lame! Just remove it, as it isn't really necessary.
	  (issue #9800, noahisaac) ........

2007-06-06 13:47 +0000 [r2574]  Matthew Fredrickson <creslin@digium.com>

	* wct4xxp/base.c: Add 220/420 support

2007-06-01 17:06 +0000 [r2551]  Matthew Fredrickson <creslin@digium.com>

	* wct4xxp/vpm450m.c, /: Merged revisions 2550 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2550
	  | mattf | 2007-06-01 11:56:09 -0500 (Fri, 01 Jun 2007) | 2 lines
	  Fix for stack overflow on FC6 and VPM450M. ........

2007-05-18 15:50 +0000 [r2540]  Matthew Fredrickson <creslin@digium.com>

	* /, zaptel-base.c: Merged revisions 2539 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2539
	  | mattf | 2007-05-18 10:48:55 -0500 (Fri, 18 May 2007) | 2 lines
	  Remove silly got signal message ........

2007-05-17 21:47 +0000 [r2536]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_zap.c, xpp/firmwares/FPGA_1151.hex,
	  xpp/utils/zconf/Zaptel/Hardware (added),
	  xpp/firmwares/FPGA_FXS.hex, xpp/xpd.h,
	  xpp/utils/zconf/Zaptel/Chans.pm, xpp/card_bri.c, xpp/ChangeLog,
	  xpp/xbus-core.c, xpp/init_card_6_26, xpp/utils/zconf/Zaptel.pm,
	  xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/utils/lszaptel,
	  xpp/utils/xpp.rules, xpp/utils/zapconf (added),
	  xpp/utils/zconf/Zaptel/Hardware/PCI.pm, xpp/utils/xpp_sync,
	  xpp/.version, xpp/firmwares/FPGA_1141.hex, xpp/README.Astribank,
	  xpp/card_global.c, xpp/utils/zaptel_hardware (added),
	  xpp/Makefile, xpp/utils/Makefile, xpp/parport_debug.c (added),
	  xpp/utils/zconf/Zaptel/Hardware/USB.pm,
	  xpp/utils/zconf/Zaptel/Xpp/Xbus.pm, xpp/parport_debug.h (added),
	  xpp/utils/zconf/Zaptel/Hardware.pm (added),
	  xpp/utils/zt_registration, xpp/init_card_7_26,
	  xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf,
	  xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: XPP revision 3965:
	  * Tested with zaptel-1.2.17.1 * Add D-Channel TX, RX and BAD
	  frames count in /proc/xpp/XBUS-*/XPD-*/bri_info * Adjust output
	  of xpp_sync script. Pad for 8 port BRI. * Added a debugging
	  module parport_debug (not compiled by default). * Added an
	  optional patch to zaptel: - compiles only if ZAPTEL_SYNC_TICK is
	  defined - Allow interested driver to register for "sync"
	  notification. - Does not affect drivers that do not use this
	  feature. * Added external synchronization feature: - Only if
	  ZAPTEL_SYNC_TICK feature is compiled in - Than XPP may be
	  synchronized by another card (e.g: an Astribank with FXS can be
	  synchronized by a Digium PRI card). - May be enabled/disabled in
	  runtime via the 'sync_tick_active' module parameter to the xpp.ko
	  module. * Fixed a potential bug in D-Channel hexdump printing. *
	  New visual indications in BRI leds: - Constant ON RED/GREEN:
	  Shows the port type -- NT/TE. - Very fast "double blink": Layer1
	  work, no D-Channel yet. - Steady blinking (1/2 sec): D-Channel
	  trafic detected. * xpp_fxloader moved to /usr/share/zaptel . *
	  adj_clock removed: never really used. * Now we have
	  Zaptel::Hardware and a sample zaptel_hardware script (not
	  (installed by default). * We also have a sample perl zapconf (not
	  installed by default) which aims at replacing genzaptelconf (sans
	  the modules detection).

2007-05-17 20:35 +0000 [r2532]  Matthew Fredrickson <creslin@digium.com>

	* wct4xxp/vpm450m.c: Reduce stack usage of VPM450M. Fix for FC6
	  module load problems

2007-05-17 18:46 +0000 [r2527]  Jason Parker <jparker@digium.com>

	* Makefile: Fix problem with chan_misdn not being built in
	  Asterisk, due to missing suppserv. Update to new tarballs from
	  misdn.org and allow versioning in Makefile. Issue 9064.

2007-05-17 16:49 +0000 [r2524]  Joshua Colp <jcolp@digium.com>

	* fxotune.c: Allow the fxotune config file to be specified instead
	  of hardcoded. (issue #8444 reported by pupeno, patch by tzafrir)

2007-05-17 14:27 +0000 [r2522]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/Makefile: The debugfs code seems to have some bad sideeffects
	  when badly used. So don't enable it by default. (From chabgeset
	  2520)

2007-05-04 22:37 +0000 [r2495]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* zaptel.init: zaptel.init: use automative modules unloading (as in
	  trunk and 1.2).

2007-05-01 16:22 +0000 [r2483]  Russell Bryant <russell@digium.com>

	* /, zonedata.c: Merged revisions 2482 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2482
	  | russell | 2007-05-01 11:20:50 -0500 (Tue, 01 May 2007) | 3
	  lines Add zonedata information for the Philippines. (issue #9525,
	  reported and patched by loloski) ........

2007-04-30 23:07 +0000 [r2480]  Kevin P. Fleming <kpfleming@digium.com>

	* zaptel.init: eliminate bogus warning message during script
	  startup with no HPEC licenses

2007-04-29 22:12 +0000 [r2477]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex,
	  xpp/xpp_zap.h, xpp/utils/hexfile.h, xpp/xproto.c,
	  xpp/firmwares/FPGA_FXS.hex, xpp/firmwares/USB_1130.hex,
	  xpp/xproto.h, xpp/firmwares/USB_1150.hex, xpp/xpd.h,
	  xpp/calibrate_slics, xpp/init_card_4_24 (removed),
	  xpp/utils/zconf/Zaptel/Chans.pm, xpp/init_card_6_24 (removed),
	  xpp/utils/xpp_blink (added), xpp/init_card_4_26 (added),
	  xpp/card_bri.c, xpp/ChangeLog (added), xpp/xbus-core.c,
	  xpp/init_card_6_26 (added), xpp/utils/zconf/Zaptel.pm,
	  xpp/utils/adj_clock.c (removed),
	  xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/utils/xpp_fxloader,
	  xpp/utils/fpga_load.c, xpp/utils/lszaptel, xpp/utils/xpp_sync,
	  xpp/.version, xpp/firmwares/FPGA_1141.hex,
	  xpp/utils/genzaptelconf.8, xpp/card_fxo.c, xpp/README.Astribank,
	  xpp/card_fxs.c, xpp/card_global.c, xpp/utils/Makefile,
	  xpp/utils/adj_clock.8 (removed), xpp/card_global.h,
	  xpp/firmwares/USB_1140.hex, xpp/utils/zconf/Zaptel/Xpp/Xbus.pm,
	  xpp/utils/fpga_load.8, xpp/init_card_3_24 (removed),
	  xpp/init_card_3_26 (added), xpp/utils/zt_registration,
	  xpp/init_card_7_24 (removed), xpp/init_card_7_26 (added),
	  xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf,
	  xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: xpp rev. 3814: *
	  Protocol no. 2.6: syncing improvements. * Support for 8-port
	  Astribank BRI. * Firmware unloading now works: rmmod xpp_usb;
	  /etc/hotplug/usb/xpp_fxloader reset * Defaults of kernel
	  parameters are now part of parameter description. *
	  World-readable kernel parameters. * No need for extra patch
	  beyond bristuff for Astribank BRI. * Default poll intervals
	  changed: 500 in BRI and FXO. * Allow changing FXS polls interval
	  at run time. * BRI initalization fixed on SUSE (path to logger).
	  * When using the SUSE zaptel rpm package, set
	  modules_var=ZAPTEL_MODULES in /etc/sysconfig/zaptel . *
	  zt_registration not verbose by default. * xpp_sync warns if FXO
	  is sync slave. * Fixed genzaptelconf -z (zapscan output
	  emulation). * PCM fixes. * Solves "multiple ticks" bug. No need
	  for pcm_tasklets workaround.

2007-04-28 21:29 +0000 [r2465-2470]  Matthew Fredrickson <creslin@digium.com>

	* wct4xxp/base.c, /: Merged revisions 2469 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2469
	  | mattf | 2007-04-28 16:07:35 -0500 (Sat, 28 Apr 2007) | 1 line
	  Fix for potential deadlock in wct4xxp driver ........

	* wcte11xp.c, /: Merged revisions 2464 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2464
	  | mattf | 2007-04-28 14:04:50 -0500 (Sat, 28 Apr 2007) | 2 lines
	  Fix for potential deadlock in drivers ........

2007-04-27 19:06 +0000 [r2460]  Jason Parker <jparker@digium.com>

	* /, ztmonitor.c: Merged revisions 2459 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2459
	  | qwell | 2007-04-27 14:05:25 -0500 (Fri, 27 Apr 2007) | 2 lines
	  Correct and remove (one of each) broken syntax examples. ........

2007-04-25 16:32 +0000 [r2452]  Matthew Fredrickson <creslin@digium.com>

	* wct1xxp.c, /: Merged revisions 2451 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2451
	  | mattf | 2007-04-25 11:26:18 -0500 (Wed, 25 Apr 2007) | 1 line
	  Start fixing potential deadlock between device driver and zaptel
	  ........

2007-04-25  Russell Bryant <russell@digium.com>

	* Zaptel 1.4.2.1 released.
	
2007-04-25 15:36 +0000 [r2444]  Jason Parker <jparker@digium.com>

	* /, zaptel-base.c: Merged revisions 2443 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2443
	  | qwell | 2007-04-25 10:35:34 -0500 (Wed, 25 Apr 2007) | 2 lines
	  Don't try to reference a variable on a channel that may not
	  exist. ........

2007-04-24  Russell Bryant <russell@digium.com>

	* Zaptel 1.4.2 released.
	
2007-04-24 18:34 +0000 [r2433-2435]  Jason Parker <jparker@digium.com>

	* /: Blocked revisions 2434 via svnmerge ........ r2434 | qwell |
	  2007-04-24 13:33:29 -0500 (Tue, 24 Apr 2007) | 1 line Backport
	  pre-echocan debugging for ztmonitor ........

	* zaptel.h, zconfig.h, ztmonitor.c, jpah.h (added), zaptel-base.c:
	  Merge in pre-echocan debugging for ztmonitor.

2007-04-13 23:14 +0000 [r2423]  Jason Parker <jparker@digium.com>

	* /, zaptel-base.c: Merged revisions 2422 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2422
	  | qwell | 2007-04-13 18:12:23 -0500 (Fri, 13 Apr 2007) | 14 lines
	  Fix several places where we treat confmode as a bitmask. It is a
	  bitmask...sort of.. I'll explain.. confmode is used for 2
	  different things. It defines both the "mode" and the "flags" of
	  the conference. The "mode" part is in 0x00FF and is NOT bitwise.
	  The "flag" part is in 0xFF00 and *IS* bitwise. Confused yet?
	  Good. So, when we want to check the "mode" of the conference, we
	  need to check only within 0xFF. There were several places where
	  this was not happening - but due to luck, it worked (...sort of).
	  That's what this patch fixes. ........

2007-04-11 19:03 +0000 [r2406]  Matt Frederickson <creslin@digium.com>

	* /, zaptel-base.c: Merged revisions 2405 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2405
	  | mattf | 2007-04-11 14:01:21 -0500 (Wed, 11 Apr 2007) | 4 lines
	  Fix buglet in memory corruption fix. ........

2007-04-07 16:47 +0000 [r2397]  Matt Frederickson <creslin@digium.com>

	* zaptel-base.c: Fix for #9208. Memory corruption within zaptel
	  data.

2007-03-30 21:03 +0000 [r2359]  Matt Frederickson <creslin@digium.com>

	* zaptel-base.c: Fix potential spinlock recursion issue.

2007-03-30 18:57 +0000 [r2354]  Jason Parker <jparker@digium.com>

	* /, zaptel-base.c: Merged revisions 2353 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2353
	  | qwell | 2007-03-30 13:56:46 -0500 (Fri, 30 Mar 2007) | 4 lines
	  Fix an issue where an echo can was freed incorrectly in certain
	  circumstances. Issue 9292, fix suggested by ddv2005. ........

2007-03-29 16:36 +0000 [r2348-2351]  Russell Bryant <russell@digium.com>

	* README.hpec, /, zaptel.init: Merged revisions 2350 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r2350 | russell | 2007-03-29 11:35:37 -0500 (Thu, 29 Mar 2007) |
	  4 lines Trim the HPEC readme that is included in zaptel to only
	  include basic information as the one on the FTP site will always
	  be the one that contains the full up to date information. Also,
	  tweak some grammar in the additions to the init script. ........

	* README.hpec (added), /, zaptel.init: Merged revisions 2347 via
	  svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
	  ........ r2347 | russell | 2007-03-29 11:05:32 -0500 (Thu, 29 Mar
	  2007) | 3 lines Add a README for HPEC, and add support for HPEC
	  in the init script. (issue #9413, chozian) ........

2007-03-27 18:49 +0000 [r2343]  Russell Bryant <russell@digium.com>

	* /, zaptel.init: Merged revisions 2342 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2342
	  | russell | 2007-03-27 13:48:23 -0500 (Tue, 27 Mar 2007) | 5
	  lines When debug is enabled, ensure that "debug=1" gets passed to
	  the zaptel module, and not just the hardware modules. Also, run
	  "ztcfg -s" at the beginning of the "stop" action of the script.
	  (issue #7409, PCadach and tzafrir) ........

2007-03-23 02:11 +0000 [r2336]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: fix builds for 2.4 kernels

2007-03-22  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.1 released.
	
2007-03-23 02:11 +0000 [r2333-2336]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile: fix builds for 2.4 kernels

	* mec.h, kb1ec.h, mec2.h, mec3.h, sec-2.h, sec.h,
	  hpec/hpec_zaptel.h, mg2ec.h, zaptel.h, zaptel-base.c: bring in
	  the rest of the support needed for HPEC

2007-03-19 16:30 +0000 [r2323]  Joshua Colp <jcolp@digium.com>

	* /, README.Linux26: Merged revisions 2322 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2322
	  | file | 2007-03-19 12:28:58 -0400 (Mon, 19 Mar 2007) | 2 lines
	  Update documentation to match current Makefile. linux26 is no
	  longer a valid target. (issue #9296 reported by valley) ........

2007-03-14 16:08 +0000 [r2308]  Matt Frederickson <creslin@digium.com>

	* wct4xxp/base.c, /: Merged revisions 2307 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2307
	  | mattf | 2007-03-14 10:03:18 -0600 (Wed, 14 Mar 2007) | 2 lines
	  Fix bug in J1 mode configuration. ........

2007-03-09 20:04 +0000 [r2302]  Matt Frederickson <creslin@digium.com>

	* wct4xxp/vpm450m.c, /: Merged revisions 2301 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2301
	  | mattf | 2007-03-09 13:59:43 -0600 (Fri, 09 Mar 2007) | 2 lines
	  Make sure we don't allocate as GFP_KERNEL in atomic context
	  ........

2007-03-08 15:58 +0000 [r2297]  Joshua Colp <jcolp@digium.com>

	* /, hpec/hpec_zaptel.h: Merged revisions 2296 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2296
	  | file | 2007-03-08 10:56:05 -0500 (Thu, 08 Mar 2007) | 2 lines
	  vprintk is only available on 2.6.9+ (issue #9232 reported by
	  baconbuttie) ........

2007-03-08 00:48 +0000 [r2294]  Russell Bryant <russell@digium.com>

	* zaptel.h: Add a constant for ZT_EVENT_REMOVED to allow a driver
	  to hint to userspace that a channel has been removed. (issue
	  #7256, tzafrir)

2007-03-07 19:36 +0000 [r2292]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Don't die when there is no udev rules dir (on an
	  installtion with INSTALL_PREFIX explicitly set). r2290 | tzafrir
	  | 2007-03-07 21:14:30 +0200 (Wed, 07 Mar 2007) | 3 lines

2007-03-05 17:02 +0000 [r2288]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* /, xpp/xpd.h: Found a proper "marker" for the gfp_t typedef. Now
	  every 2.6.9 is supported. r2286 | tzafrir | 2007-03-05 18:14:11
	  +0200 (Mon, 05 Mar 2007) | 2 lines

2007-03-05 05:42 +0000 [r2283]  Kevin P. Fleming <kpfleming@digium.com>

	* build_tools/make_firmware_object, wcte12xp.c, /: Merged revisions
	  2280-2282 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2280
	  | kpfleming | 2007-03-04 23:34:43 -0600 (Sun, 04 Mar 2007) | 2
	  lines ensure that we run objdump in the most generic language
	  possible to avoid complications on non-English systems (issue
	  #9196) ........ r2281 | kpfleming | 2007-03-04 23:40:37 -0600
	  (Sun, 04 Mar 2007) | 2 lines remove stray character that my
	  editor decided to add ........ r2282 | kpfleming | 2007-03-04
	  23:41:30 -0600 (Sun, 04 Mar 2007) | 2 lines this driver does not
	  use workqueues, so does not need this header (issue #9196)
	  ........

2007-03-02 22:20 +0000 [r2267-2273]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* zaptel.init: Support proper loading of the Astribank (xpp) with
	  proper initialization.

	* Makefile: Don't "fail" a modprobe of ztdummy just because
	  zaptel.conf is bad.

	* /, xpp/Makefile: Clarify a cyptic build message. r2266 | tzafrir
	  | 2007-03-02 22:40:06 +0200 (Fri, 02 Mar 2007) | 2 lines

2007-03-01 19:50 +0000 [r2244-2259]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xbus-core.c, /: r2257 | tzafrir | 2007-03-01 21:29:12 +0200
	  (Thu, 01 Mar 2007) | 2 lines SLAB_KERNEL is an obsolete alias of
	  GFP_KERNEL. Fix build on Vanilla 2.6.20 .

	* /, xpp/utils/Makefile: r2252 | tzafrir | 2007-02-28 22:57:52
	  +0200 (Wed, 28 Feb 2007) | 3 lines Make the xpp/utils/Makefile in
	  1.2 closer to the one in 1.4 (and actually work, this tine).

	* /: Forgot to update properties

	* xpp/xpp_zap.c, xpp/utils/hexfile.c, xpp/firmwares/FPGA_1151.hex,
	  xpp/xpp_zap.h, xpp/utils/hexfile.h, xpp/xproto.c,
	  xpp/utils/zconf/Zaptel, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h,
	  xpp/xpd.h, xpp/firmwares/USB_1150.hex,
	  xpp/utils/zconf/Zaptel/Chans.pm, xpp/utils/zconf/Zaptel/Xpp,
	  xpp/card_bri.c (added), xpp/xbus-core.c,
	  xpp/utils/zconf/Zaptel.pm, xpp/utils/test_parse.c,
	  xpp/utils/zconf/Zaptel/Xpp/Xpd.pm, xpp/card_bri.h (added),
	  xpp/utils/xpp_fxloader, xpp/utils/fpga_load.c, xpp/xbus-core.h,
	  xpp/utils/lszaptel (added), xpp/utils/xpp_sync (added),
	  xpp/.version (added), xpp/firmwares/FPGA_1141.hex,
	  xpp/card_fxo.c, xpp/card_fxs.c, xpp/card_global.c, xpp/Makefile,
	  xpp/utils/Makefile, xpp/utils/zconf (added),
	  xpp/firmwares/USB_1140.hex, xpp/utils/zconf/Zaptel/Xpp/Xbus.pm,
	  xpp/utils/zt_registration (added),
	  xpp/utils/zconf/Zaptel/Span.pm, xpp/utils/genzaptelconf,
	  xpp/utils/zconf/Zaptel/Xpp.pm, xpp/xpp_usb.c: xpp rev. 3495:
	  ------------------------------------------------------------------------
	  r2243 | tzafrir | 2007-02-28 02:05:59 +0200 (Wed, 28 Feb 2007) |
	  4 lines * xpp rev. 3495: fix a race in the FXO driver of recent
	  weeks. * Add the Astribank BRI driver (though still needs
	  bristuffed zaptel to build and thus will not build by default)
	  ------------------------------------------------------------------------
	  r2239 | tzafrir | 2007-02-27 08:14:18 +0200 (Tue, 27 Feb 2007) |
	  18 lines Xorcom rev. 3491: * Version of xpp modules is set from
	  xpp/.version, rather than "unknown". * Astribank devices are now
	  initialized in parallel: faster startup when there are multiple
	  Astribanks. * Re-added support for the old format of
	  /proc/xpp/sync write: (echo N 0 > /proc/xpp/sync ) . The new
	  format (SYNC=NN) is preffered. * Firmware update to fix a PCM
	  issue. * Fixed a build issue with kernel 2.6.8 . * Fixed missing
	  initialization in Zaptel::Xpp::Xbus . * genzaptelconf will now
	  set FXS ports as LS by default. To set them as KS, use
	  fxs_default_start=ks in /etc/default/zaptel /
	  /etc/sysconfig/zaptel (Also a workaround for #7755 ). *
	  Groundwork for sync from zaptel master span: if zaptel is built
	  with ZAPTEL_SYNC_TIC (see zaptel/team/tzafrir/sync ), xpp will
	  report its drift from the zaptel sync master. * USB firmware
	  update: had bad lines checksums (and fxload did not report). *
	  fpga_load can now better report bad hex file checksum ;-) .
	  ------------------------------------------------------------------------
	  r2223 | tzafrir | 2007-02-24 03:05:05 +0200 (Sat, 24 Feb 2007) |
	  3 lines Add the Zaptel and Zaptel::Xpp perl modules, and some
	  simple utilities that use them. disabled by default for now.
	  ------------------------------------------------------------------------
	  r2222 | tzafrir | 2007-02-24 02:55:05 +0200 (Sat, 24 Feb 2007) |
	  2 lines Make the xpp/utils/Makefile in 1.2 closer to the one in
	  1.4 .

2007-02-26 18:20 +0000 [r2230-2233]  Joshua Colp <jcolp@digium.com>

	* Makefile, /: Merged revisions 2232 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2232
	  | file | 2007-02-26 13:18:13 -0500 (Mon, 26 Feb 2007) | 2 lines
	  Just in case... set hotplug firmware loading option to no if on a
	  2.4 kernel. (issue #9140 reported by velter) ........

	* Makefile: Move menuselect build options inclusion to before it is
	  initially used otherwise the needed variables may not be present
	  at time of use. (issue #9145 reported by jmls)

2007-02-26 10:13 +0000 [r2229]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* doc/fxotune.8: The fxotune man page was misleading. Dumping some
	  content into it. Still needs work.

2007-02-24 00:13 +0000 [r2215-2220]  Kevin P. Fleming <kpfleming@digium.com>

	* datamods/Makefile, wct4xxp/Kbuild (removed), Makefile, wcte12xp.c
	  (added), wct4xxp/Makefile, zaptel.xml, hpec (added), zaptel.c
	  (removed), zttranscode.c, wctc4xxp (added), Makefile.kernel26
	  (added), wct4xxp/Makefile.kernel26 (added), zaptel.h,
	  firmware/firmware.xml, zaptel-base.c (added): partial update to
	  support all the stuff that went into Zaptel 1.2 recently... this
	  definitely still broken for 2.4 kernels, and maybe for 2.6 as
	  well :-) includes: Makefile split and reorganize TE120P driver
	  TC400B driver HPEC support (not yet complete)

2007-02-21 17:27 +0000 [r2200-2209]  Matt Frederickson <creslin@digium.com>

	* wct4xxp/base.c, /: Merged revisions 2208 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2208
	  | mattf | 2007-02-21 11:26:05 -0600 (Wed, 21 Feb 2007) | 2 lines
	  Make sure we do the IRQ fix in the gen1 interrupt handler as
	  well. ........

	* wct4xxp/vpm450m.c, /: Merged revisions 2199 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2199
	  | mattf | 2007-02-21 09:57:20 -0600 (Wed, 21 Feb 2007) | 2 lines
	  Make sure we do the check for memory allocation failure. ........

	* wct4xxp/vpm450m.c, /: Merged revisions 2198 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2198
	  | mattf | 2007-02-21 09:49:50 -0600 (Wed, 21 Feb 2007) | 2 lines
	  Reduce our stack usage when using the vpm450m ........

2007-02-21 14:00 +0000 [r2195]  Kevin P. Fleming <kpfleming@digium.com>

	* build_tools/make_svn_branch_name, /: Merged revisions 2194 via
	  svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
	  ........ r2194 | kpfleming | 2007-02-21 08:00:20 -0600 (Wed, 21
	  Feb 2007) | 2 lines use new tag version numbering script ........

2007-02-20 20:17 +0000 [r2180]  Russell Bryant <russell@digium.com>

	* Makefile: Fix the check that ran the install for xpp/utils. Also,
	  add a target to build them, and clean the directory in the clean
	  target. (issue #8894, tzafrir)

2007-02-17 17:15 +0000 [r2170]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/Makefile: xpp/utils: Use autoconf's test for libusb.

2007-02-16 22:18 +0000 [r2167]  Matt Frederickson <creslin@digium.com>

	* /, wctdm24xxp.c: Merged revisions 2166 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2166
	  | mattf | 2007-02-16 16:14:48 -0600 (Fri, 16 Feb 2007) | 2 lines
	  Fix detection of second single port modules so it actually works
	  now. ........

2007-02-12 23:42 +0000 [r2158-2160]  Joshua Colp <jcolp@digium.com>

	* firmware/Makefile, Makefile: Add hotplug-uninstall target to main
	  Makefile and make the firmware Makefile keep a record of the
	  installed firmware in the hotplug directory. This means that as
	  long as you have the latest version of firmware installed your
	  checkout will never install it again, and all new checkouts will
	  not either. This might also help those building packages for
	  distros.

2007-02-11 15:48 +0000 [r2151]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xbus-core.c: struct inode and debugfs: break some Fedoras
	  rather than all others. (from changeset 2150)

2007-02-10 20:43 +0000 [r2147]  Joshua Colp <jcolp@digium.com>

	* firmware/Makefile: Only attempt to install firmware to the
	  hotplug directories if any was selected.

2007-02-10 00:22 +0000 [r2142-2146]  Kevin P. Fleming <kpfleming@digium.com>

	* zaptel.xml: add some inter-module dependencies and add wctc4xxp
	  to menuselect list

	* zaptel.xml: clean up module naming there is no need to enable the
	  user to skip building zaptel or ztdynamic (probably zttranscode
	  too... menuselect needs an upgrade)

2007-02-09 18:39 +0000 [r2136-2140]  Joshua Colp <jcolp@digium.com>

	* firmware/Makefile: It's probably a good idea to make the tarballs
	  a requirement to make the object files.

	* firmware/Makefile, wct4xxp/base.c, Makefile: Drop the need for
	  header files by using non-versioned binary files.

2007-02-09 15:06 +0000 [r2123-2135]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* Makefile: Fix 'make clean' on kernel 2.4: datamods is only made
	  on 2.6.

	* Makefile: Build xpp/ for kernel >= 2.6.8, not >=2.6.9.

	* xpp/xpp_zap.c: Now 'chans' is used after all.

	* xpp/xpp_zap.c, xpp/firmwares/FPGA_1151.hex, xpp/xpp_zap.h,
	  xpp/xproto.c, xpp/firmwares/FPGA_FXS.hex, xpp/xproto.h,
	  xpp/xpd.h, xpp/init_card_4_23 (removed), xpp/init_card_4_24
	  (added), xpp/init_card_6_24 (added), xpp/xbus-core.c,
	  xpp/utils/adj_clock.c, xpp/utils/xpp_fxloader, xpp/xbus-core.h,
	  xpp/utils/fpga_load.c, xpp/xdefs.h, xpp, xpp/utils/xpp.rules
	  (added), xpp/firmwares/FPGA_1141.hex (added), xpp/card_fxo.c,
	  xpp/card_global.c, xpp/card_fxs.c, xpp/README.Astribank,
	  xpp/utils/zaptel-helper (added), xpp/zaptel-helper (removed),
	  xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8,
	  xpp/firmwares/USB_1140.hex (added), xpp/zap_debug.c,
	  xpp/utils/fpga_load.8, xpp/init_card_3_23 (removed),
	  xpp/init_card_3_24 (added), xpp/zap_debug.h, xpp/init_card_7_24
	  (added), xpp/xpp_log.h (added), xpp/utils/genzaptelconf,
	  xpp/xpp_usb.c: Branch 1.4 is back in sync (currently: xorcom rev.
	  3332): * Performance improvements for multi-XPD (span) devices. *
	  Astribank BRI driver (in next commit). * Changes under /proc: -
	  XBUS and XPD numbers have two digits. - Every script wildcard
	  should be replaced from XBUS-? to XBUS-[0-9]* - Added
	  /proc/xpp/XBUS-*/XPD-*/blink: echo 1 to start and 0 to stop. *
	  Several countries (South Africa, UAE, anybody else) require a
	  shorter ring delay. Adjust FXO reg 0x17 (23)'s bits 0:2 to 011. *
	  Use tasklets to move most of the interrupt PCM copying out of the
	  interrupt. * Debugfs-based code to dump data to userspace (used
	  to debug BRI D channel). * Pretend every 2.6.9 actually has later
	  RHEL's typedefs. * fpga_load supports /dev/bus/usb . * Fixed
	  physical order sorting in genzaptelconf. * Reverse polarity and
	  power denial detection. * A short led flash at registration time.
	  * Add a real version of the xpp modules to them (independent of
	  the Zaptel version). * Update our line status even when not
	  registered. * Fixed a false SIG_CHANGED when inserting or
	  removing cable to FXO. * Fixed compilation fixes for 2.6.20 (Bug
	  #8982) * A cleaner fix for the bool changes of 2.6.19 . *
	  Automatically detect echo_can_state_t at debug time. *
	  Automaitcally set XPP_DEBUGFS (depending on debugfs) at compile
	  time. * Bug-fixes to zaptel-helper. Moved to xpp/utils . * Xbus
	  protocol version: 2.4 (Zaptel 1.2.12/1.4.0 had 2.3). XPS Init
	  scripts renamed accordingly.

2007-02-07 21:25 +0000 [r2111-2120]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/base.c, /: Merged revisions 2119 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2119
	  | kpfleming | 2007-02-07 15:22:44 -0600 (Wed, 07 Feb 2007) | 2
	  lines don't allow wct4xxp workqueue support to be built against
	  kernel 2.6.20... it's not going to work ........

	* Makefile, xpp/xbus-core.c, /: Merged revisions 2110 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r2110 | kpfleming | 2007-02-07 14:29:22 -0600 (Wed, 07 Feb 2007)
	  | 3 lines build XPP on the kernels that Xorcom says are OK to
	  build on update workqueue usage to conform to kernel 2.6.20 API
	  ........

2007-02-07 20:01 +0000 [r2107]  Joshua Colp <jcolp@digium.com>

	* wct4xxp/vpm450m.c, build_tools/make_tree (added), firmware
	  (added), wct4xxp/base.c, Makefile, configure,
	  wct4xxp/OCT6114-64D.ima (removed), firmware/firmware.xml,
	  makeopts.in, firmware/Makefile, wct4xxp/Kbuild, zaptel.xml
	  (added), wct4xxp/Makefile, menuselect-tree (removed),
	  wct4xxp/OCT6114-128D.ima (removed), configure.ac: Merge in
	  zaptel-firmware branch. This basically downloads the firmware
	  from the FTP site and builds the appropriate headers based on the
	  current version. Drivers just know they need a certain firmware
	  and get fed the current version. If this prevents your zaptel
	  from building do a make distclean and start fresh or make sure
	  the firmware is checked in make menuselect.

2007-02-07 19:55 +0000 [r2105]  Kevin P. Fleming <kpfleming@digium.com>

	* /, zttranscode.c: Merged revisions 2103 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2103
	  | kpfleming | 2007-02-07 13:52:29 -0600 (Wed, 07 Feb 2007) | 2
	  lines include headers we need... new kernel releases won't do it
	  for us ........

2007-02-07 16:51 +0000 [r2099]  Russell Bryant <russell@digium.com>

	* ztcfg.c: In case the ZT_GETVERSION ioctl fails, ensure that the
	  buffers are initialized to "Unknown" so that we don't try to
	  print uninitialized string buffers. (issue #8992, Oron Peled,
	  tzafrir)

2007-02-05 21:55 +0000 [r2087]  Kevin P. Fleming <kpfleming@digium.com>

	* Makefile, /: Merged revisions 2086 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2086
	  | kpfleming | 2007-02-05 15:54:40 -0600 (Mon, 05 Feb 2007) | 2
	  lines fix version-numbering logic ........

2007-01-31 20:19 +0000 [r2065-2066]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/zaptel-helper (added): r2064: tzafrir | 2007-01-31 21:48:39
	  +0200 zaptel-helper deserves wider exposure. Note: it is not
	  getting installed. However it will probably help preven the
	  braking of Astribank drivers loading for those who do care.

	* xpp/utils/genzaptelconf: Merging 1.2 changes of genzaptelconf: *
	  -l (list) now works reliebly. * Cleared some leftover writes to
	  standard output. * Fixed xpp spans sort order.

2007-01-31 14:12 +0000 [r2039-2044]  Kevin P. Fleming <kpfleming@digium.com>

	* pciradio.c, zttool.c, wct4xxp/base.c, ztcfg-dude.c, Makefile,
	  zaptel.c, torisatool.c, torisa.c, tonezone.c, ztdynamic.c,
	  wcfxsusb.c, ztmonitor.c, makefw.c, build_tools/genmodconf,
	  ztcfg.c, wct1xxp.c, wctdm.c, ztd-eth.c, /, wcusb.c, wctdm24xxp.c,
	  wcfxo.c, tor2.c: Merged revisions 2043 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2043
	  | kpfleming | 2007-01-31 08:06:34 -0600 (Wed, 31 Jan 2007) | 4
	  lines fix up author email addresses use the kernel's built-in
	  support for module aliases instead of manually doing it in
	  modprobe.conf or equivalent add wctdm8xxp alias for wctdm24xxp
	  ........

	* wct4xxp/base.c, /: Merged revisions 2038 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r2038
	  | kpfleming | 2007-01-30 19:33:25 -0600 (Tue, 30 Jan 2007) | 2
	  lines final fix for non-hotplug firmware loading ........

2007-01-30 18:11 +0000 [r2019]  Russell Bryant <russell@digium.com>

	* /: Blocked revisions 2018 via svnmerge ........ r2018 | russell |
	  2007-01-30 12:11:11 -0600 (Tue, 30 Jan 2007) | 5 lines - Make the
	  build of xpp occur with 2.6.8 or above, instead of 2.6.10 -
	  remove the installation of the userspace tools - remove the
	  architecture check (issue #8894, tzafrir) ........

2007-01-29 19:21 +0000 [r1998]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/base.c, /: Merged revisions 1996 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1996
	  | kpfleming | 2007-01-29 13:20:32 -0600 (Mon, 29 Jan 2007) | 2
	  lines _really_ fix the non-hotplug firmware case ........

2007-01-27 16:16 +0000 [r1988]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/base.c, /: Merged revisions 1987 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1987
	  | kpfleming | 2007-01-27 10:14:54 -0600 (Sat, 27 Jan 2007) | 2
	  lines properly reference the size symbol produced by objcopy
	  ........

2007-01-26 15:27 +0000 [r1969-1982]  Matt Frederickson <creslin@digium.com>

	* wctdm24xxp.c: Add additional product support.

2007-01-24 13:11 +0000 [r1954]  Kevin P. Fleming <kpfleming@digium.com>

	* /, wcfxo.c: Merged revisions 1953 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1953
	  | kpfleming | 2007-01-24 07:01:36 -0600 (Wed, 24 Jan 2007) | 2
	  lines might as well fix this driver too :-) ........

2007-01-24 00:38 +0000 [r1944]  Russell Bryant <russell@digium.com>

	* Makefile, /: Merged revisions 1943 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1943
	  | russell | 2007-01-23 18:35:48 -0600 (Tue, 23 Jan 2007) | 3
	  lines If the xpp pieces get built, install the userspace
	  utilities as well. (issue #8894) ........

2007-01-23 21:49 +0000 [r1937]  Matt Frederickson <creslin@digium.com>

	* wcte11xp.c, wct1xxp.c, wctdm.c, /, wctdm24xxp.c: Merged revisions
	  1936 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1936
	  | mattf | 2007-01-23 15:28:14 -0600 (Tue, 23 Jan 2007) | 3 lines
	  Make sure we don't clear the interrupt before we might have
	  received it in shared interrupt line scenarios. ........

2007-01-23 15:39 +0000 [r1921-1924]  Kevin P. Fleming <kpfleming@digium.com>

	* /, ztd-eth.c: Merged revisions 1923 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1923
	  | kpfleming | 2007-01-23 09:39:12 -0600 (Tue, 23 Jan 2007) | 2
	  lines use the proper function prototype for 2.6 kernels ........

	* xpp/xpp_zap.c, pciradio.c, wctdm.c, /, zaptel.c, torisa.c,
	  wctdm24xxp.c: Merged revisions 1920 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1920
	  | kpfleming | 2007-01-23 09:25:42 -0600 (Tue, 23 Jan 2007) | 2
	  lines clean up various compiler warnings ........

2007-01-23 01:58 +0000 [r1913]  Joshua Colp <jcolp@digium.com>

	* /, zonedata.c: Merged revisions 1912 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1912
	  | file | 2007-01-22 20:57:00 -0500 (Mon, 22 Jan 2007) | 2 lines
	  Fix Congestion tone for Australia. (issue #8891 reported by JT)
	  ........

2007-01-22 22:43 +0000 [r1892-1899]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/base.c, /: Merged revisions 1898 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1898
	  | kpfleming | 2007-01-22 16:43:06 -0600 (Mon, 22 Jan 2007) | 3
	  lines use better definition for linked-in firmware data ensure
	  that hotplug-loaded firmware is released when we are finished
	  with it ........

	* wct4xxp/base.c, /: Merged revisions 1891 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1891
	  | kpfleming | 2007-01-22 15:12:35 -0600 (Mon, 22 Jan 2007) | 2
	  lines make the non-hotplug firmware case actually compile again
	  ........

2007-01-22 21:04 +0000 [r1889]  Jason Parker <jparker@digium.com>

	* Makefile: Fix typo in Makefile Issue 8885, patch by James

2007-01-22 20:59 +0000 [r1878-1887]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/base.c, /: Merged revisions 1886 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1886
	  | kpfleming | 2007-01-22 14:58:30 -0600 (Mon, 22 Jan 2007) | 2
	  lines might be good if i committed the working version of this
	  code... ........

	* wct4xxp/vpm450m.c, wct4xxp/base.c, wct4xxp/vpm450m.h, /: Merged
	  revisions 1877 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1877
	  | kpfleming | 2007-01-22 12:58:34 -0600 (Mon, 22 Jan 2007) | 2
	  lines update to PR47 Octasic API kit, and use new GetCapacityPins
	  API call to only attempt downloading the correct firmware for the
	  modules we find ........

2007-01-18 23:50 +0000 [r1855]  Matt Frederickson <creslin@digium.com>

	* wct4xxp/base.c: Backporting revs 1812 and 1854 into 1.4.

2007-01-16 23:45 +0000 [r1836]  Jason Parker <jparker@digium.com>

	* /, fxsdump.c (removed): Merged revisions 1835 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1835
	  | qwell | 2007-01-16 17:44:28 -0600 (Tue, 16 Jan 2007) | 6 lines
	  Remove file that was never (literally) able to compile - dates
	  all the way back to zaptel 0.8.0 If we can figure out where this
	  coeffs.h comes from, I suppose it would be easy to add this back
	  in the future. Issue 8493 ........

2007-01-16 04:38 +0000 [r1820-1828]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/vpm450m.c, build_tools/make_firmware_object, /: Merged
	  revisions 1826-1827 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1826
	  | kpfleming | 2007-01-15 22:30:00 -0600 (Mon, 15 Jan 2007) | 3
	  lines make the 'firmware object' files load the firmware blobs as
	  read-only data simplify the code that uses the firmware objects a
	  bit ........ r1827 | kpfleming | 2007-01-15 22:37:06 -0600 (Mon,
	  15 Jan 2007) | 2 lines use latest Octasic API tag ........

	* wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c, Makefile,
	  build_tools/make_firmware_object (added), wct4xxp/Makefile,
	  wct4xxp/vpm450m.h, /, wct4xxp, wct4xxp/fw2h.c (removed): Merged
	  revisions 1818 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1818
	  | kpfleming | 2007-01-15 19:28:54 -0600 (Mon, 15 Jan 2007) | 3
	  lines eliminate the fw2h tool, and instead use objcopy to
	  directly make object files from the firmware binary files pass
	  HOTPLUG_FIRMWARE down to the module build so that we can avoid
	  various compiler warnings ........

2006-12-30 19:11 +0000 [r1774]  Joshua Colp <jcolp@digium.com>

	* Makefile, /: Merged revisions 1773 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1773
	  | file | 2006-12-30 14:09:50 -0500 (Sat, 30 Dec 2006) | 2 lines
	  Specify full path to restorecon instead of assuming it will be
	  available from what is in $PATH. (issue #8671 reported by djflux)
	  ........

2006-12-27 22:49 +0000 [r1767]  Kevin P. Fleming <kpfleming@digium.com>

	* xpp/xpp_zap.c, xpp/card_fxo.c, /, xpp/card_fxs.c, xpp/xpp_usb.c:
	  Merged revisions 1766 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1766
	  | kpfleming | 2006-12-27 16:47:19 -0600 (Wed, 27 Dec 2006) | 2
	  lines remove pointless duplication of ZAPTEL_VERSION that causes
	  these modules to be rebuilt every time a commit is made to any
	  part of Zaptel ........

2006-12-23  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.0 released.
	
2006-12-18 14:01 +0000 [r1726-1729]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xdefs.h, xpp: r1724@boole: tzafrir | 2006-12-18 15:55:59
	  +0200 Code is 2.6-specific anyway, no need for an explicit test.

	* xpp, xpp/xpp_usb.c: r1723@boole: tzafrir | 2006-12-18 15:54:04
	  +0200 Use the internal version (without locking) of
	  usb_reset_device. Intended for kernel 2.6.9 and earlier. Finally
	  full support of 2.6.8 and 2.6.9. r2937: diego | 2006-12-17
	  14:20:36 +0200 r2940: tzafrir | 2006-12-17 16:32:51 +0200

	* xpp/xpp_zap.c, xpp: r1722@boole: tzafrir | 2006-12-18 15:50:36
	  +0200 xpp_zap.c: Better error hanlding during module init. orig
	  r2948: oron | 2006-12-17 18:54:00 +0200

	* xpp, xpp/xpd.h: r1721@boole: tzafrir | 2006-12-18 15:46:42 +0200
	  Assume every 2.6.9 kernel is a later RHEL4 kernel, which
	  backported the gfp_t typedef. Either way we break some systems).
	  r2938: diego | 2006-12-17 14:22:16 +0200

2006-12-15 13:50 +0000 [r1716-1719]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/xpp_zap.c, xpp/card_fxo.c, xpp/README.Astribank,
	  xpp/utils/xpp_fxloader, xpp/utils/genzaptelconf, xpp: Sync to xpp
	  RELEASE-1.2.0 2933. r2847@boole: diego | 2006-12-03 10:33:00
	  +0200 added documentation which explains which packages are
	  needed to build the drivers on different distributions.
	  r2862@boole: tzafrir | 2006-12-05 08:43:50 +0200
	  README.Astribank: A typo in the sample config (changeset:2861).
	  r2891@boole: tzafrir | 2006-12-08 01:11:45 +0200 Re-accept
	  changeset:2832 after all. r2892@boole: tzafrir | 2006-12-08
	  02:46:07 +0200 Merge genzaptelconf changeset:2866 from trunk: *
	  Zapata comment on unidentified channel goes to $zapata_file *
	  Correct pattern for Sangoma A200 card's channels. r2893@boole:
	  tzafrir | 2006-12-08 03:11:37 +0200 genzaptelconf: * Add options
	  xpp_fxo_rxgain: add a custom rxgain for every XPP FXO channel. *
	  Do print the original line for every channel. r2909@boole:
	  tzafrir | 2006-12-10 20:03:59 +0200 Add some sleeps in older
	  kernels in the firmware loading script. r2932@boole: tzafrir |
	  2006-12-14 17:30:12 +0200 Make the warning about a call to
	  off-hook FXO debug. At least if we cannot suppress it at module
	  load time. r2933@boole: tzafrir | 2006-12-14 17:32:00 +0200 Don't
	  redefine 'bool' on newer kerenls to fix building with kernel
	  2.6.19. Taken from Digium tree. (from changeset:2930)

	* xpp/firmwares/FPGA_1151.hex, xpp/firmwares/FPGA_FXS.hex, xpp:
	  r1715@boole: tzafrir | 2006-12-15 14:35:26 +0200 Firmwares to fix
	  caller ID detection timing issue.

2006-12-12  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.0-beta3 released.
	
2006-12-11 19:07 +0000 [r1698-1701]  Kevin P. Fleming <kpfleming@digium.com>

	* /, xpp/xdefs.h: Merged revisions 1700 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1700
	  | kpfleming | 2006-12-11 13:05:43 -0600 (Mon, 11 Dec 2006) | 2
	  lines kernel 2.6.19 now has a type called 'bool', although it's
	  not completely implemented so there will still be some warnings
	  when building xpp against 2.6.19 kernel headers ........

	* pciradio.c, wct4xxp/base.c, wcte11xp.c, wct1xxp.c, wctdm.c, /,
	  torisa.c, wcusb.c, wctdm24xxp.c, zaptel.h, tor2.c, wcfxo.c:
	  Merged revisions 1697 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1697
	  | kpfleming | 2006-12-11 12:27:15 -0600 (Mon, 11 Dec 2006) | 2
	  lines kernel 2.6.19 API changes compatibility ........

2006-12-06 23:25 +0000 [r1687]  Joshua Colp <jcolp@digium.com>

	* Makefile, ztcfg-dude.c, /: Merged revisions 1686 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r1686 | file | 2006-12-06 18:22:11 -0500 (Wed, 06 Dec 2006) | 2
	  lines Link ztcfg-dude against stdc++ so we get needed functions.
	  (issue #8494 reported by Romik) ........

2006-12-01 00:13 +0000 [r1673-1678]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/card_fxo.c, xpp: r1671@boole: tzafrir | 2006-12-01 01:30:24
	  +0200 r2806@boole: oron | 2006-11-27 16:54:06 +0200 Fixed panic
	  in ticket:147 merged code from changeset:2802 changeset:2804

	* xpp/card_fxo.c, xpp: r1670@boole: tzafrir | 2006-12-01 01:29:57
	  +0200 r2794@boole: oron | 2006-11-26 14:24:15 +0200 Remove all
	  SOFT_RING code (unused for a long time).

	* xpp/xpp_zap.c, xpp, xpp/xpd.h: r1668@boole: tzafrir | 2006-11-30
	  23:48:25 +0200 r2832@boole: tzafrir | 2006-11-29 11:06:06 +0200
	  Add parameter xpp_ec to the module xpp (xpp_zap.c). Defaults to
	  1. If 0, module will use Zaptel echo canceller even with
	  XPP_EC_CHUNK. Parameter is read-only for now: cannot be set
	  through /sys/modules. (Merge of changeset:2830)

	* xpp/utils/genzaptelconf, xpp: r1667@boole: tzafrir | 2006-11-30
	  23:46:46 +0200 r2831@boole: tzafrir | 2006-11-29 11:05:08 +0200
	  genzaptelconf: A list of countries for which to use busydetect.
	  (backport of changeset:2829)

	* xpp/init_card_3_23, xpp/init_card_4_23, xpp/calibrate_slics,
	  xpp/card_fxo.c, xpp/xbus-core.c, xpp/card_global.c,
	  xpp/card_fxs.c, xpp/README.Astribank, xpp/utils/Makefile,
	  xpp/Makefile, xpp/utils/genzaptelconf, xpp: r1666@boole: tzafrir
	  | 2006-11-30 23:46:11 +0200 r2817@boole: oron | 2006-11-28
	  13:39:47 +0200 Maintenance branch for asterisk-1.2.x

2006-11-30 00:24 +0000 [r1664]  Jason Parker <jparker@digium.com>

	* build_tools/genmodconf, /: Merged revisions 1663 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r1663 | qwell | 2006-11-29 18:23:33 -0600 (Wed, 29 Nov 2006) | 2
	  lines Fix issue that was discovered by using dash as /bin/sh
	  instead of bash. ........

2006-11-29 22:27 +0000 [r1661]  Kevin P. Fleming <kpfleming@digium.com>

	* /, zconfig.h: Merged revisions 1660 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1660
	  | kpfleming | 2006-11-29 16:24:07 -0600 (Wed, 29 Nov 2006) | 2
	  lines clarify the BOOST_RINGER compile-time option ........

2006-11-29 17:31 +0000 [r1656-1658]  Matt Frederickson <creslin@digium.com>

	* ztcfg.c: Fix for #7860. Make sure we don't allow channel 16 to be
	  clear if it's in E1/CAS mode.

	* zttool.c: Fix for (#8300)

2006-11-26 08:12 +0000 [r1642]  Russell Bryant <russell@digium.com>

	* wcte11xp.c, /: Merged revisions 1641 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1641
	  | russell | 2006-11-26 03:10:22 -0500 (Sun, 26 Nov 2006) | 3
	  lines Remove a misplaced semicolon which caused some debug output
	  to be printed regardless of the debug setting. (issue #8414,
	  gknispel_proformatique) ........

2006-11-22 23:30 +0000 [r1637]  Matt Frederickson <creslin@digium.com>

	* zaptel.c: Update for #8403

2006-11-21 15:19 +0000 [r1623]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/Makefile: Typo: SBINDIR -> BINDIR .

2006-11-17 17:47 +0000 [r1614-1615]  Jason Parker <jparker@digium.com>

	* Makefile: Fix an issue (8071) where wct4xxp wasn't being put into
	  /etc/modprobe.d/zaptel (or similar). There should be no reason
	  that adding wct4xxp to the MODULES variable at this point in the
	  Makefile, would cause any harm. Somebody please correct me if I'm
	  wrong... (Fix is slightly different from 1.2)

	* /: Blocked revisions 1613 via svnmerge ........ r1613 | qwell |
	  2006-11-17 11:43:12 -0600 (Fri, 17 Nov 2006) | 5 lines Fix an
	  issue (8071) where wct4xxp wasn't being put into
	  /etc/modprobe.d/zaptel (or similar). There should be no reason
	  that adding wct4xxp to the MODULES variable at this point in the
	  Makefile, would cause any harm. Somebody please correct me if I'm
	  wrong... ........

2006-11-17 04:12 +0000 [r1611]  BJ Weschke <bweschke@btwtech.com>

	* /, zaptel.c: Merged revisions 1610 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1610
	  | bweschke | 2006-11-16 23:06:05 -0500 (Thu, 16 Nov 2006) | 4
	  lines mattf - I'm not sure if this is where you wanted the
	  definitions placed. If not, please fix, but this gets the
	  compiles working again for now. ........

2006-11-17 00:52 +0000 [r1606-1609]  Matt Frederickson <creslin@digium.com>

	* zaptel.c: Fix for 7991.

	* zaptel.c: Fix for 7769

2006-11-11 14:34 +0000 [r1590]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/init_card_3_23, xpp/init_card_4_23: init_card[34]_23: merge
	  from 2654,2655. * Redirect stderr to /dev/null. Without any
	  redirection, it may fail with exitval=4 . Probably, fd 2 is
	  closed and the shell (or sed which is used in the scripts) tries
	  to write to it (or do some other I/O related syscall) which
	  fails. * make XPP_BASE handling identical in the two scripts.

2006-11-09 15:58 +0000 [r1576]  Russell Bryant <russell@digium.com>

	* Makefile: fix an expression in the install target (issue #8321,
	  tzafrir)

2006-11-08 23:06 +0000 [r1574]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp/vpm450m.c, wct4xxp/base.c, wcte11xp.c, wct4xxp/vpm450m.h,
	  /: Merged revisions 1573 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1573
	  | kpfleming | 2006-11-08 17:04:33 -0600 (Wed, 08 Nov 2006) | 3
	  lines clean up recent VPMOCT changes add support for Infineon
	  FALC rev 2.2 ........

2006-11-08 16:01 +0000 [r1571]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/utils/print_modes.c: Fixed a typo in the "wctdm
	  reimplementation".

2006-11-08 03:44 +0000 [r1566-1568]  Kevin P. Fleming <kpfleming@digium.com>

	* wct4xxp, configure, configure.ac, makeopts.in: update configure
	  script to add searching for libusb update svn:ignore for new
	  firmware header file names

2006-11-06 22:48 +0000 [r1565]  Matt Frederickson <creslin@digium.com>

	* wct4xxp/vpm450m.c, wct4xxp/Kbuild, wct4xxp/base.c,
	  wct4xxp/Makefile, wct4xxp/vpm450m.h, wct4xxp/OCT6114-64D.ima
	  (added): Add support into 1.4 branch for new VPMOCT64 as well

2006-11-06 19:07 +0000 [r1557-1558]  Tzafrir Cohen <tzafrir.cohen@xorcom.com>

	* xpp/init_card_3_23, xpp/init_card_4_23: Fixes for card init
	  scripts from rev 2633: * Don't log card init scripts to
	  /tmp/results . * Document how to trace, though. * init_card_4_23:
	  don't re-open the slics file.

	* xpp/xpp_zap.c, xpp/utils/print_modes.c,
	  xpp/utils/xpp_fxloader.usermap, xpp/firmwares/FPGA_1151.hex
	  (added), xpp/xpp_zap.h, xpp/slic.c (removed), xpp/xproto.c,
	  xpp/firmwares/FPGA_FXS.hex (added), xpp/firmwares/USB_1130.hex
	  (added), xpp/utils/USB_1130.hex (removed), xpp/utils/FPGA_FXS.hex
	  (removed), xpp/slic.h (removed), xpp/init_data_3_20.cmd
	  (removed), xpp/xpd.h, xpp/xproto.h, xpp/firmwares/USB_1150.hex
	  (added), xpp/init_card_4_23 (added), xpp/calibrate_slics,
	  xpp/xbus-core.c, xpp/init_data_4_19.cmd (removed),
	  xpp/utils/adj_clock.c (added), xpp/utils/xpp_fxloader,
	  xpp/xbus-core.h, xpp/xdefs.h, xpp, xpp/utils,
	  xpp/utils/genzaptelconf.8, xpp/card_fxo.c, xpp/card_global.c,
	  xpp/card_fxs.c, xpp/README.Astribank, xpp/card_fxo.h,
	  xpp/utils/Makefile, xpp/Makefile, xpp/utils/adj_clock.8 (added),
	  xpp/card_fxs.h, xpp/card_global.h, xpp/init_data_4_20.cmd
	  (removed), xpp/init_card_3_23 (added), xpp/initialize_registers
	  (removed), xpp/init_data_3_19.cmd (removed),
	  xpp/firmwares/LICENSE.firmware (added), xpp/firmwares/README
	  (added), xpp/utils/USB_8613.hex (removed), xpp/LICENSE.firmware
	  (removed), xpp/utils/genzaptelconf, xpp/firmwares (added),
	  xpp/xpp_usb.c: Merging xpp driver release 1.2 (rev. 2569),
	  originally team/tzafrir/xpp_1.2 * Should build well. Almost
	  final. * genzaptelconf: Also work when zap_autoreg=0 *
	  README.Astribank updated for rev. 1.2. * xpp/utils/Makefile: Use
	  $< with cc -c * Get xpp/utils configuration from autoconf
	  (without changesin top dir)

2006-11-01 19:04 +0000 [r1547]  Russell Bryant <russell@digium.com>

	* Makefile, wct4xxp/Makefile, configure, configure.ac,
	  xpp/utils/Makefile, makeopts.in: instead of setting HOSTCC and CC
	  directly in the Makefile, use the information provided by the
	  configure script (issue #8055, tzafrir)

2006-10-31 06:26 +0000 [r1543]  Russell Bryant <russell@digium.com>

	* Makefile, /: Merged revisions 1542 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1542
	  | russell | 2006-10-31 01:25:16 -0500 (Tue, 31 Oct 2006) | 3
	  lines fix the installation of wct4xxp for 2.4 kernels (issue
	  #7964, fixed by gkloepfer, but the committed fix is slightly
	  modified) ........

2006-10-26 00:03 +0000 [r1536]  Kevin P. Fleming <kpfleming@digium.com>

	* wctdm.c, /, wctdm24xxp.c: Merged revisions 1534-1535 via svnmerge
	  from https://origsvn.digium.com/svn/zaptel/branches/1.2 ........
	  r1534 | kpfleming | 2006-10-25 18:54:41 -0500 (Wed, 25 Oct 2006)
	  | 2 lines do ProSLIC 3215 check properly ........ r1535 |
	  kpfleming | 2006-10-25 19:00:31 -0500 (Wed, 25 Oct 2006) | 2
	  lines do ProSLIC 3215 check properly in this driver too ........

2006-10-24 01:33 +0000 [r1528-1530]  Russell Bryant <russell@digium.com>

	* pciradio_vhdl.tar.gz (removed), raddiag.tar.gz (removed): Both of
	  these files are corrupted and can not be decompressed, so they
	  need to be re-added. (issue #8134)

	* /, doc/ztmonitor.8, doc/zttool.8, doc/ztcfg.8: Merged revisions
	  1527 via svnmerge from
	  https://origsvn.digium.com/svn/zaptel/branches/1.2 ........ r1527
	  | russell | 2006-10-23 21:08:27 -0400 (Mon, 23 Oct 2006) | 3
	  lines convert some characters of ISO8859-1 encoding to be UTF-8
	  (issue #8200, jcollie) ........

2006-10-20 01:26 +0000 [r1520]  Joshua Colp <jcolp@digium.com>

	* /, torisa.c, zaptel.h, zconfig.h: Merged revisions 1519 via
	  svnmerge from https://origsvn.digium.com/svn/zaptel/branches/1.2
	  ........ r1519 | file | 2006-10-19 21:23:26 -0400 (Thu, 19 Oct
	  2006) | 2 lines Later distros have now taken to removing this
	  file as it has been deprecated for awhile now... so on kernels
	  2.6.18 or higher we can safely not include it. (props to jsmith)
	  ........

2006-10-18 02:15 +0000 [r1518]  Russell Bryant <russell@digium.com>

	* /: Blocked revisions 1517 via svnmerge ........ r1517 | russell |
	  2006-10-17 22:14:43 -0400 (Tue, 17 Oct 2006) | 3 lines remove
	  ROOT_PREFIX, and move INSTALL_PREFIX to before the first time it
	  is used (issue #7913, darren1713) ........

2006-10-17  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.0-beta2 released.
	
2006-10-17 16:40 +0000 [r1507]  Russell Bryant <russell@digium.com>

	* wct4xxp/base.c: Set the readbuf size to be the same size of the
	  variable, readsize. This buffer was 31 bytes, while the readsize
	  could be 32 bytes, causing a read into invalid memory. (issue
	  #8155, araasch)

2006-10-11 17:25 +0000 [r1500]  Joshua Colp <jcolp@digium.com>

	* Makefile: Copy to both directories, not just the first one.

2006-10-02 23:50 +0000 [r1490]  Matt O'Gorman <mogorman@digium.com>

	* wctdm.c, wctdm24xxp.c: add support for setting gain registers on
	  the fxo and fxs modules.

2006-09-20  Kevin P. Fleming  <kpfleming@digium.com>

	* Zaptel 1.4.0-beta1 released.
