#
# this config file was automatically generated
# using lirc-0.7.0pre8(serial) on Tue Nov  2 11:54:10 2004
#
# contributed by Serial Cleaner <serialcleaner|gmx.net>
#
# brand:	FREE
# model no. of remote control: FREEBOX_REMOTE
# devices being controlled by this remote: 
#		Freebox Modem ADSL/TV
#		http://www.free.fr
#

begin remote

  name 		FREEBOX_REMOTE
  bits           12
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  one           550  4505
  zero          550  1976
  ptrail        551
  gap          79667
  min_repeat      1
  toggle_bit      5


      begin codes
                             0x0000000000000D1D
                              0x0000000000000D15
          KEY_OPTION                  0x0000000000000D38
          ?                        0x0000000000000D3B
          KEY_RED                      0x0000000000000D39
          KEY_GREEN                    0x0000000000000D1E
          KEY_YELLOW                   0x0000000000000D3E
          KEY_BLUE                     0x0000000000000D31
          KEY_MUTE                     0x0000000000000D1F
                               0x0000000000000D20
          GUIDE                    0x0000000000000D21
          KEY_STOP                     0x0000000000000D23
                         0x0000000000000D24
          KEY_RECORD                      0x0000000000000D22
          KEY_OK                       0x0000000000000D33
          P+                       0x0000000000000D34
          P-                       0x0000000000000D35
          KEY_VOLUMEDOWN                     0x0000000000000D36
          KEY_VOLUMEUP                     0x0000000000000D37
                                  0x0000000000000D29
                               0x0000000000000D2A
                              0x0000000000000D3C
          KEY_HOME                     0x0000000000000D3D
          KEY_1                        0x0000000000000D00
          KEY_2                        0x0000000000000D08
          KEY_3                        0x0000000000000D10
          KEY_4                        0x0000000000000D01
          KEY_5                        0x0000000000000D09
          KEY_6                        0x0000000000000D11
          KEY_7                        0x0000000000000D02
          KEY_8                        0x0000000000000D0A
          KEY_9                        0x0000000000000D12
          KEY_0                        0x0000000000000D0E
          *                        0x0000000000000D18
          #                        0x0000000000000D05
# Howto code # as a char and not commentary delimiter ?
      end codes

end remote


