#
# This config file has been automatically converted from a device file
# found in the 06/26/00 release of the Windows Slink-e software
# package.
#
# Many thanks to Colby Boles of Nirvis Systems Inc. for allowing us to
# use these files.
#
# The original filename was: "nec rc-6010 multisync proj.cde"
#
# The original description for this device was:
#
# nec rc-6010 multisync proj. moni
#


begin remote

  name  RC-6010
  bits           32
  flags SPACE_ENC
  eps            20
  aeps          200

  header       8800  4400
  one           550  1650
  zero          550   550
  ptrail        550
  repeat       8800  2200
  gap          38500
  toggle_bit      0

  frequency    38000

      begin codes
                           0x0000000018EF10EF
                          0x0000000018EF28D7
                            0x0000000018EF609F
                           0x0000000018EFE21D
                         0x0000000018EFA25D
          KEY_1                        0x0000000018EF18E7
          KEY_2                        0x0000000018EF9867
          KEY_3                        0x0000000018EF58A7
          KEY_4                        0x0000000018EFD827
          KEY_5                        0x0000000018EF38C7
          KEY_6                        0x0000000018EFB847
          KEY_7                        0x0000000018EF7887
          KEY_8                        0x0000000018EFF807
          KEY_9                        0x0000000018EF02FD
          10                       0x0000000018EF827D
          KEY_R                        0x0000000018EF00FF
          KEY_B                        0x0000000018EF40BF
          KEY_UP                       0x0000000018EF3AC5
          KEY_DOWN                     0x0000000018EFBA45
          KEY_LEFT                     0x0000000018EFFA05
          KEY_RIGHT                    0x0000000018EF7A85
                             0x0000000018EFC23D
          KEY_ENTER                    0x0000000018EFE817
                              0x0000000018EF906F
      end codes

end remote
