#
# this config file was automatically generated
# using lirc-0.6.1 on Fri Sep  1 22:34:30 2000
#
# contributed by Bastian
#
# brand:             pace
# model:             mss 300 serie
# supported devices: ?
#

# Pace remote controls send two header signals before the acutal
# code. The length of one header signal is approx. 750 3000. With the
# chosen tolerance values LIRC confuses the header signals with a
# 0. In this case this is ok, because otherwise you would have to
# create a raw_codes config file that does not support toggle
# bits. But it might cause problems if you want to send these signals.

begin remote

  name  pace
  bits           10
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  one           658  6930
  zero          658  4402
  ptrail        661
  pre_data_bits   2
  pre_data       0x0
  gap          121416
  toggle_bit      3


      begin codes
          KEY_1                        0x0000000000000301
          KEY_2                        0x0000000000000102
          KEY_3                        0x0000000000000303
          KEY_4                        0x0000000000000104
          KEY_5                        0x0000000000000305
          KEY_6                        0x0000000000000106
          KEY_7                        0x0000000000000307
          KEY_8                        0x0000000000000108
          KEY_9                        0x0000000000000309
          KEY_0                        0x0000000000000100
          KEY_UP                       0x000000000000031A
          KEY_LEFT                     0x0000000000000116
          KEY_RIGHT                    0x0000000000000311
          KEY_DOWN                     0x000000000000010B
          KEY_MENU                     0x0000000000000317
          KEY_OK                       0x000000000000011F
          KEY_BACK                     0x000000000000030F
          KEY_RED                      0x000000000000010E
          KEY_GREEN                    0x000000000000030C
          KEY_YELLOW                   0x0000000000000112
          KEY_BLUE                     0x000000000000030D
      end codes

end remote
