#
# this config file was automatically generated
# using lirc-0.8.2(default) on Thu Apr 10 10:42:39 2008
#
# contributed by 
#
# brand:                       PHILIPS
# model no. of remote control: RC-2012
# devices being controlled by this remote: DVP5982
#

begin remote

  name  Philips_RC-2012
  bits            8
  flags RC6|CONST_LENGTH
  eps            30
  aeps          100

  header       2667   889
  one           444   444
  zero          444   444
  pre_data_bits   13
  pre_data       0xEFB
  gap          108000
  toggle_bit_mask 0x10000
  rc6_mask    0x10000

      begin codes
                             0x38
          KEY_MENU                     0x2E
          display                  0xF0
          KEY_UP                       0xA7
          KEY_LEFT                     0xA5
          KEY_OK                       0xA3
          KEY_RIGHT                    0xA4
          KEY_DOWN                     0xA6
                              0x7C
          KEY_SETUP                    0x7D
          KEY_PREVIOUS                     0xDE
          KEY_NEXT                     0xDF
          KEY_PLAYPAUSE               0xD3
          KEY_STOP                     0xCE
          usb                      0x81
          KEY_1                        0xFE
          KEY_2                        0xFD
          KEY_3                        0xFC
          KEY_4                        0xFB
          KEY_5                        0xFA
          KEY_6                        0xF9
          KEY_7                        0xF8
          KEY_8                        0xF7
          KEY_9                        0xF6
          KEY_SUBTITLE                 0xB4
          KEY_0                        0xFF
          KEY_AUDIO                    0xB1
          KEY_ZOOM                     0x08
          KEY_AGAIN                   0xE2
          repeat-a-b               0xC4
      end codes

end remote


