#
# this config file was automatically generated
# using lirc-0.8.1-CVS(default) on Fri Oct 13 23:04:45 2006
#
# contributed by Frank Bennett
#
# brand:                       Pioneer
# model no. of remote control: BR-V3 CATV
# devices being controlled by this remote: Pioneer Digital CATV STB BD-V300
#

begin remote

  name  Pioneer_BR-V3_CATV
  bits           32
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       8511  4281
  one           566  1560
  zero          566   504
  ptrail        566
  gap          89952
  toggle_bit      0


      begin codes
                          0x55AA38C7
               0x55AAC837
                      0x55AA08F7
                    0x55AA8877
                             0x35CA38C7
                              0x35CA12ED
                     0x35CACC33
                              0x35CACC33
                               0x35CACC33
          KEY_1                        0x35CA807F
          KEY_2                        0x35CA40BF
          KEY_3                        0x35CAC03F
          KEY_4                        0x35CA20DF
          KEY_5                        0x35CAA05F
          KEY_6                        0x35CA609F
          KEY_7                        0x35CAE01F
          KEY_8                        0x35CA10EF
          KEY_9                        0x35CA906F
                               0x35CA00FF
          11                       0x35CACC33
          12                       0x35CACC33
                         0x35CA08F7
                       0x35CA8877
                                 0x35CACC33
          KEY_MUTE                     0x55AA926D
                          0x55AA50AF
                        0x55AAD02F
                            0x35CAD22D
                           0x35CAC837
                            0x35CAF20D
                              0x35CA728D
          KEY_UP                       0x35CA1AE5
          KEY_DOWN                     0x35CA9A65
          KEY_LEFT                     0x35CAEA15
          KEY_RIGHT                    0x35CA6A95
                             0x35CA32CD
          guide                    0x35CA0AF5
                            0x35CA2AD5
                               0x35CACC33
                             0x35CACA35
                                0x35CACC33
                               0x35CACC33
                             0x35CACC33
                             0x35CACC33
                               0x35CA18E7
                                0x35CACC33
                            0x35CACC33
                            0x35CA22DD
                      0x35CACC33
                     0x35CA52AD
                    0x35CADA25
                     0x35CA3AC5
                              0x35CACC33
                              0x35CA7887
                             0xF50A8C73
      end codes

end remote


#
# this config file was automatically generated
# using lirc-0.8.1-CVS(default) on Mon Oct 16 07:50:58 2006
#
# contributed by Frank Bennett
#
# brand:                       Pioneer
# model no. of remote control: BR-V3
# devices being controlled by this remote: BD-V300 CATV STB
#
#
# This configuration file works only to send signals to the
# STB using irsend.  It will not work to interpret signals
# sent by the remote.
#
# The BD-V300 remote sends some commands as two 32-bit elements.
# Because the STB expects to see commands repeated once, this means 
# you need to send four codes (A, B, A, B) for these commands.
# The remaining codes (those without a suffix) should be sent
# twice to trigger action by the STB.
#
#
# Here are a few examples using irsend:
#
# Change to terrestrial television mode:
#
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 chijo-A chijo-B chijo-A chijo-B 
#
# Change to cable television mode:
#
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 catv-A catv-B catv-A catv-B
#
# Change to channel 231
#
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 ch-A ch-B ch-A ch-B
#   sleep 1
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 2 2
#   sleep 1
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 3 3
#   sleep 1
#   irsend -d /dev/lircd1 SEND_ONCE pioneer_br_v3 1 1
#

begin remote

  name  Pioneer_BR_V3
  bits           32
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       8509  4280
  one           566  1560
  zero          566   504
  ptrail        566
  gap          89937
  min_repeat      0
  toggle_bit      0


      begin codes
          dengen                   0x35CA38C7
          chijo-A                  0x35CACC33
          chijo-B                  0xF50ADC23
          bscs-A                   0x35CACC33
          bscs-B                   0xF50ABC43
          catv-A                   0x35CACC33
          catv-B                   0xF50A7C83
          ch-A                     0x35CACC33
          ch-B                     0xF50A3CC3
          1                        0x35CA807F
          2                        0x35CA40BF
          3                        0x35CAC03F
          4                        0x35CA20DF
          5                        0x35CAA05F
          6                        0x35CA609F
          7                        0x35CAE01F
          8                        0x35CA10EF
          9                        0x35CA906F
          10-0                     0x35CA00FF
          11-A                     0x35CACC33
          11-B                     0xF50A9C63
          12-A                     0x35CACC33
          12-B                     0xF50A1CE3
          onsei                    0x35CA7887
          jimaku-A                 0x35CACC33
          jimaku-B                 0xF50A8C73
      end codes

end remote
