#
# this config file was automatically generated
# using lirc-0.6.3(serial) on Sat Jun 16 02:09:22 2001
#
# contributed by nop@gameart.com
#
# brand:             Remotec
# model:             RM200 (CC-sized from Conrad Electonics Germany)
# supported devices: Homebrew serial reciever (c't Magazine Germany)
#
# note: AUX mode!  (SETUP -> AUX)  *** Other mode -> other codes ***
# note: DO compile your serial driver as module... Really do it! ;-)

begin remote

  name  rm200
  bits            7
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       2429   544
  one          1237   539
  zero          638   539
  ptrail        638
  post_data_bits  4
  post_data      0x8
  gap          40847
  min_repeat      1
  toggle_bit      0


      begin codes
          KEY_POWER                    0x000000000000007D
          KEY_1                        0x0000000000000000
          KEY_2                        0x0000000000000040
          KEY_3                        0x0000000000000020
          KEY_4                        0x0000000000000060
          KEY_5                        0x0000000000000010
          KEY_6                        0x0000000000000050
          KEY_7                        0x0000000000000030
          KEY_8                        0x0000000000000070
          KEY_9                        0x0000000000000008
                                0x000000000000007C
          KEY_0                        0x0000000000000048
                             0x0000000000000072
          KEY_REWIND                      0x0000000000000066
          KEY_PLAY                     0x0000000000000026
          KEY_FORWARD                      0x0000000000000016
          KEY_STOP                     0x000000000000000E
          KEY_PAUSE                    0x000000000000004E
                            0x0000000000000006
                            0x0000000000000046
          KEY_MUTE                     0x000000000000005A
                             0x0000000000000064
          KEY_VOLUMEUP                   0x0000000000000024
      end codes

end remote




