#
# this config file was automatically generated
# using lirc-0.7.0pre2(lirc_parallel) on Sun Nov  2 15:40:24 CET 2003
#
# contributed by Christoph Bartelmus
#
# brand:             SEG
# model:             VR-F2PA / 97P1R2PAA4
# supported devices: VCR 302 / VCR 306
#
#
# Remark:
# manually derived this from the very similar 97P1R2CCF0 config file
#
#   Christoph

begin remote

  name  SEG_VCR_2200
  bits            8
  flags SPACE_ENC
  eps            30
  aeps          100

  header       8100  3933
  one           555  1450
  zero          555   450
  ptrail        555
  pre_data_bits   8
  pre_data       0xA8
  pre           555  3960
  gap          20892
  repeat_bit      0

      begin codes
                               0x000000000000009c
                            0x00000000000000A8
          KEY_1                        0x0000000000000080
          KEY_2                        0x0000000000000040
          KEY_3                        0x00000000000000C0
                             0x0000000000000068
          KEY_4                        0x0000000000000020
          KEY_5                        0x00000000000000A0
          KEY_6                        0x0000000000000060
          AV                       0x000000000000006C
          KEY_7                        0x00000000000000E0
          KEY_8                        0x0000000000000010
          KEY_9                        0x0000000000000090
                              0x00000000000000B8
                               0x0000000000000078
          KEY_0                        0x0000000000000000
                        0x0000000000000098
                        0x00000000000000e4

          KEY_PAUSE                    0x0000000000000088
          KEY_REWIND                      0x0000000000000008
          KEY_PLAY                     0x0000000000000070
          KEY_FASTFORWARD                      0x00000000000000F0
          KEY_STOP                     0x00000000000000B0
          KEY_RECORD                   0x0000000000000048
          KEY_EJECTCD                    0x0000000000000084

                              0x00000000000000D8
                               0x00000000000000C8
                                0x00000000000000E8
          KEY_MENU                     0x0000000000000044
                            0x00000000000000F8
                          0x000000000000008C
          KEY_OK                       0x0000000000000094
                         0x00000000000000AC
                             0x00000000000000FC
                             0x00000000000000CC
                                0x0000000000000018
                               0x0000000000000058
      end codes

end remote


