#
# this config file was automatically generated
# using lirc-0.6.6(sir) on Fri Aug 20 12:35:54 2004
#
# contributed by Daniel Pekelharing <pekelharing|tiscali.co.za>
#
# brand    : Sharp
# model no.: G1208AJ
# used by  : Sharp VCSA335 (VCR)
#
# This is the VCR section of this remote, the TV section is appended to the end.

begin remote

  name  G1208AJ
  bits           15
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps           100

  one           431  1665
  zero          431   625
  ptrail        431
  gap          63668
  min_repeat      2
  toggle_bit      0

  toggle_mask     0x3FF

      begin codes
          KEY_POWER                    0x00000000000061A2
                               0x00000000000062C2
                       0x0000000000006262
                              0x0000000000006062
                        0x0000000000006026
                          0x0000000000006306
          KEY_MENU                     0x0000000000006066
                                0x0000000000006166
          KEY_UP                       0x0000000000006266
          KEY_DOWN                     0x00000000000060E6
          KEY_LEFT                     0x00000000000062E6
          KEY_RIGHT                    0x0000000000006366
          TIMER                    0x000000000000600E
                              0x0000000000006012
          KEY_1                        0x0000000000006202
          KEY_2                        0x0000000000006102
          KEY_3                        0x0000000000006302
          KEY_4                        0x0000000000006082
          KEY_5                        0x0000000000006282
          KEY_6                        0x0000000000006182
          KEY_7                        0x0000000000006382
          KEY_8                        0x0000000000006042
          KEY_9                        0x0000000000006242
          KEY_0                        0x0000000000006142
                           0x00000000000062C6
          DISPLAY                  0x00000000000060C6
          KEY_CHANNELUP               0x0000000000006222
          KEY_CHANNELDOWN             0x0000000000006122
                       0x00000000000060B2
                              0x0000000000006342
          KEY_REWIND                   0x0000000000006312
          KEY_PLAY                     0x0000000000006112
                       0x0000000000006212
          KEY_STOP                     0x0000000000006392
          KEY_RECORD                   0x0000000000006052
          KEY_PAUSE                    0x0000000000006292
                               0x0000000000006252
                              0x0000000000006032
                              0x00000000000063D2
                               0x00000000000061C2
                            0x00000000000063E2
      end codes

end remote

#
# this config file was automatically generated
# using lirc-0.6.6(sir) on Fri Aug 20 12:38:17 2004
#
# contributed by Daniel Pekelharing <pekelharing|tiscali.co.za>
#
# brand     : Sharp
# model no. : G1208AJ
# used by   : TV
#
# This is the TV section of the above Control.

begin remote

  name  G1208AJ_TV
  bits            8
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  one           282  1827
  zero          282   772
  ptrail        281
  post_data_bits  7
  post_data      0x22
  gap          67500
  toggle_bit      0

  toggle_mask     0x3FF

      begin codes
          OPERATE                  0x0000000000000083
          INPUT_SELECT             0x0000000000000086
          CHANNEL_UP               0x0000000000000084
          CHANNEL_DOWN             0x0000000000000082
          VOLUME_UP                0x0000000000000081
          VOLUME_DOWN              0x0000000000000085
      end codes

end remote

