Local Operations (Fillet, Chamfer and other Features)

Functions
def	geompy.MakeFilletAll
	Perform a fillet on all edges of the given shape.
def	geompy.MakeFillet
	Perform a fillet on the specified edges/faces of the given shape.
def	geompy.MakeFilletR1R2
	The same that MakeFillet() but with two Fillet Radius R1 and R2.
def	geompy.MakeFillet1D
	Perform a fillet on the specified edges of the given shape.
def	geompy.MakeFillet2D
	Perform a fillet at the specified vertices of the given face/shell.
def	geompy.MakeChamferAll
	Perform a symmetric chamfer on all edges of the given shape.
def	geompy.MakeChamferEdge
	Perform a chamfer on edges, common to the specified faces, with distance D1 on the Face1.
def	geompy.MakeChamferEdgeAD
	Perform a chamfer on edges.
def	geompy.MakeChamferFaces
	Perform a chamfer on all edges of the specified faces, with distance D1 on the first specified face (if several for one edge)
def	geompy.MakeChamferFacesAD
	The Same that MakeChamferFaces() but with params theD is chamfer lenght and theAngle is Angle of chamfer (angle in radians or a name of variable which defines angle in degrees)
def	geompy.MakeChamferEdges
	Perform a chamfer on edges, with distance D1 on the first specified face (if several for one edge)
def	geompy.MakeChamferEdgesAD
	The Same that MakeChamferEdges() but with params theD is chamfer lenght and theAngle is Angle of chamfer (angle in radians or a name of variable which defines angle in degrees)
def	geompy.MakeChamfer
	/sa MakeChamferEdge() and MakeChamferFaces()
def	geompy.MakeExtrudedCut
	Remove material from a solid by extrusion of the base shape on the given distance.
def	geompy.MakeExtrudedBoss
	Add material to a solid by extrusion of the base shape on the given distance.

Detailed Description

Function Documentation

def geompy.MakeFilletAll	(		self,
			theShape,
			theR
	)

Perform a fillet on all edges of the given shape.

Parameters

theShape	Shape, to perform fillet on.
theR	Fillet radius.

Returns

New GEOM.GEOM_Object, containing the result shape.

Example 1
Example 2

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeFillet	(		self,
			theShape,
			theR,
			theShapeType,
			theListShapes
	)

Perform a fillet on the specified edges/faces of the given shape.

Parameters

theShape	Shape, to perform fillet on.
theR	Fillet radius.
theShapeType	Type of shapes in theListShapes (see ShapeType())
theListShapes	Global indices of edges/faces to perform fillet on.

Note

Global index of sub-shape can be obtained, using method GetSubShapeID().

Returns

New GEOM.GEOM_Object, containing the result shape.

Example

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeFilletR1R2	(		self,
			theShape,
			theR1,
			theR2,
			theShapeType,
			theListShapes
	)

The same that MakeFillet() but with two Fillet Radius R1 and R2.

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeFillet1D	(		self,
			theShape,
			theR,
			theListOfVertexes
	)

Perform a fillet on the specified edges of the given shape.

Parameters

theShape	Wire Shape to perform fillet on.
theR	Fillet radius.
theListOfVertexes	Global indices of vertexes to perform fillet on.

Note

Global index of sub-shape can be obtained, using method GetSubShapeID()

The list of vertices could be empty, in this case fillet will done done at all vertices in wire

Returns

New GEOM.GEOM_Object, containing the result shape.

Example

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeFillet2D	(		self,
			theShape,
			theR,
			theListOfVertexes
	)

Perform a fillet at the specified vertices of the given face/shell.

Parameters

theShape	Face or Shell shape to perform fillet on.
theR	Fillet radius.
theListOfVertexes	Global indices of vertexes to perform fillet on.

Note

Global index of sub-shape can be obtained, using method GetSubShapeID().

Returns

New GEOM.GEOM_Object, containing the result shape.

Example

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeChamferAll	(		self,
			theShape,
			theD
	)

Perform a symmetric chamfer on all edges of the given shape.

Parameters

theShape	Shape, to perform chamfer on.
theD	Chamfer size along each face.

Returns

New GEOM.GEOM_Object, containing the result shape.

Example 1
Example 2

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeChamferEdge	(		self,
			theShape,
			theD1,
			theD2,
			theFace1,
			theFace2
	)

Perform a chamfer on edges, common to the specified faces, with distance D1 on the Face1.

Parameters

theShape	Shape, to perform chamfer on.
theD1	Chamfer size along theFace1.
theD2	Chamfer size along theFace2.
theFace1,theFace2	Global indices of two faces of theShape.

Note

Global index of sub-shape can be obtained, using method GetSubShapeID().

Returns

New GEOM.GEOM_Object, containing the result shape.

Example

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeChamferEdgeAD	(		self,
			theShape,
			theD,
			theAngle,
			theFace1,
			theFace2
	)

Perform a chamfer on edges.

Parameters

theShape	Shape, to perform chamfer on.
theD	Chamfer length
theAngle	Angle of chamfer (angle in radians or a name of variable which defines angle in degrees)
theFace1,theFace2	Global indices of two faces of theShape.

Note

Global index of sub-shape can be obtained, using method GetSubShapeID().

Returns

New GEOM.GEOM_Object, containing the result shape.

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeChamferFaces	(		self,
			theShape,
			theD1,
			theD2,
			theFaces
	)

Perform a chamfer on all edges of the specified faces, with distance D1 on the first specified face (if several for one edge)

Parameters

theShape	Shape, to perform chamfer on.
theD1	Chamfer size along face from theFaces. If both faces, connected to the edge, are in theFaces, theD1 will be get along face, which is nearer to theFaces beginning.
theD2	Chamfer size along another of two faces, connected to the edge.
theFaces	Sequence of global indices of faces of theShape.

Note

Global index of sub-shape can be obtained, using method GetSubShapeID().

Returns

New GEOM.GEOM_Object, containing the result shape.

Example

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeChamferFacesAD	(		self,
			theShape,
			theD,
			theAngle,
			theFaces
	)

The Same that MakeChamferFaces() but with params theD is chamfer lenght and theAngle is Angle of chamfer (angle in radians or a name of variable which defines angle in degrees)

Example

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeChamferEdges	(		self,
			theShape,
			theD1,
			theD2,
			theEdges
	)

Perform a chamfer on edges, with distance D1 on the first specified face (if several for one edge)

Parameters

theShape	Shape, to perform chamfer on.
theD1,theD2	Chamfer size
theEdges	Sequence of edges of theShape.

Returns

New GEOM.GEOM_Object, containing the result shape.

Example

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeChamferEdgesAD	(		self,
			theShape,
			theD,
			theAngle,
			theEdges
	)

The Same that MakeChamferEdges() but with params theD is chamfer lenght and theAngle is Angle of chamfer (angle in radians or a name of variable which defines angle in degrees)

References geompy.ParseParameters(), and geompy.RaiseIfFailed().

def geompy.MakeChamfer	(		self,
			aShape,
			d1,
			d2,
			aShapeType,
			ListShape
	)

/sa MakeChamferEdge() and MakeChamferFaces()

Example

def geompy.MakeExtrudedCut	(		self,
			theInit,
			theBase,
			theH,
			theAngle
	)

Remove material from a solid by extrusion of the base shape on the given distance.

Parameters

theInit	Shape to remove material from. It must be a solid or a compound made of a single solid.
theBase	Closed edge or wire defining the base shape to be extruded.
theH	Prism dimension along the normal to theBase
theAngle	Draft angle in degrees.

Returns

New GEOM.GEOM_Object, containing the initial shape with removed material

Example

References geompy.RaiseIfFailed().

def geompy.MakeExtrudedBoss	(		self,
			theInit,
			theBase,
			theH,
			theAngle
	)

Add material to a solid by extrusion of the base shape on the given distance.

Parameters

theInit	Shape to add material to. It must be a solid or a compound made of a single solid.
theBase	Closed edge or wire defining the base shape to be extruded.
theH	Prism dimension along the normal to theBase
theAngle	Draft angle in degrees.

Returns

New GEOM.GEOM_Object, containing the initial shape with added material

Example

References geompy.RaiseIfFailed().